MCB coils winding machine WD-1V-MCW series
Main Features
1) Tooling changeover time is less than 10 minutes;
2) It can insert the coil and wedge into stator slot automatically at a time;
3) Paper feeding, coil and wedge inserting are driven by servo motors;
4) Different parameters could be set in human-machine interface;
5) The speed and feeding mode is acquirable according to different slot filling rates and different kinds of wire;
6) Different sizes stator production can be done by changing tooling;
7) Especially apply to micro induction motor such as air conditioner motor, washing machine motor, compression motor, fan motor, generator and pump motor.
prominent merit:
1. Z axis can enable customers to control the coils height
2. auto servo motor peeling device 1 set is equipped, so that it can ensure stable clean enamel peeling off for the round wire .
Wire size | max 4mm |
Max stroke of wire feeding spindle | 40mm |
Reel direction | right and left hand |
Min instruction value of winding spindle (Y) | 0.1 degree |
Max instruction value of winding spindle(Y) | +/-99 degree, +/-359.9 degree |
Min set value of cam spindle(X) | 0.1 degree |
Max set value of cam spindle(X) | 359.9 degree |
Min set value of lifting spindle(Z) | 0.01 |
Max set value of lifting spindle(Z) | 40 |
Cycle time | 0-50pcs/m |
Winding motor | 2KW |
Cam motor | 3KW |
Lifting motor | 1.5KW |
Working size | 1900x1200x1650mm |
Weight | 950KGS |
The next process for both end flatening(forming)machine WD-1V-MCF is for your option,