Auto Spark Plugs Hyundai Elantra Kia Pride 1.3L 1.6L (1985-) KK151 18110

1, OE Number or Parts Number

KK151 18110 / KK150 18110 / 18811 11051 / 0 002 330 702 / BP 5ET-10 / R 44XLS-11

2, Fit Model

3 , Testing And Warranty

4 , Raw Materials

• Conductive core : Japan and Germany
• Ceramics : China
• Coating : Professional plating

5 , Advantage

1. Multi-Ribs of insulator eliminate flashover

2. Insulator made of 95% pure alumina,Strong resistant to heat shock,great mechanic and electric features,super insulation.

3. Nickel plated housing prevents oxidation and corrosion,heat crimping process ensures absolute gas-tight fit.

4. Inner sealing with conductive glass ensures a fine conductivity and sealing

5. Multi-layer gaskets are elasticly strong,and reliable in sealing.

6. Copper core electrode prevents oxidation and corrosion,good electric and heat conductivity,long spark

plug service life

6, Electrode Classification

From the material that is divided into nickel copper (ordinary), platinum and iridium. Which iridium platinum represents the center electrode is platinum and the electrode is platinum. Compared to other common materials, iridium platinum performance:

1, start performance better, because the need to start the lower the voltage, the easier to start (iridium need the lowest voltage, followed by platinum, the highest general).

2, the higher the melting point, the longer life. The iridium has a melting point of 2454 °, a platinum of 1769 ° and a nickel copper of 1453 °.

3, cutting-edge discharge, will burn more fully, more power, the ignition side is not easy to carbon deposition.

4, the gap: the size of the gap will affect the ignition end of the flame core size. The larger the gap, the bigger the flame, and vice versa. This is required to adjust in accordance with the requirements of the engine, if the gap is too large, will cause the ignition system needs to increase the voltage, may lead to fire, fuel economy and damage to the ignition system. If the gap is too small, it will cause the phenomenon of not flashing (sales to remind the repair master before the installation, you must observe whether there is contact between the electrodes, because the logistics or other conditions caused by bumps caused by falling on the ground so that two motors stick Together).