Linear Bearing Single Axis Optical Experiment Manual Mobile Stage PT-SD73
This single axis displacement table PT-SD73 features hardened steel linear bearings for precise movement and extended service life. The displacement table is pre equipped with a micrometer head as a driver, with 15 M6 screw holes on each displacement table and 2 06.0mm countersunk head holes at the bottom. Users can install it onto the bread board or optical platform using M6 cap screws.
Manual linear Stage Product characteristics
1. Modular design facilitates the combination of displacement tables into XY and XYZ configurations;
2. The stroke of the micrometer head drive is 13mm, with a division of 10 μ m;
3. The platform body has 15 M6 screw holes and 2 6.0mm countersunk head holes at the bottom;
Manual linear Stage Product Parameters
Model Number | PT-SD73 |
Travel Range | 13mm |
Driving Method | Vernier Micrometer Head |
Indexing Accuracy | 10μm |
Platform Size | 90.8*36.1*18.1mm(Excluding regulator) |
Thread Type | 15 M6 screw holes, 2 Ø6mm countersunk head holes |
Weight | 127.2g |
Material | 7075 Aluminium Alloy |
The total stroke of the PT-SD73 single axis displacement table is 25mm. Equipped with a micrometer head driver, the stroke of the micrometer head is 13mm, with a division of 10μm.
In addition to being used as a single axis displacement table, the modular appearance design facilitates the assembly and assembly of two displacement tables to form an XY axis displacement table. If you want to build a displacement table with XYZ configuration, you need to use a right angle adapter.