Precision slide , Mobile platform , Can be installed vertically , Motorized Linear Stage PP110 - 30 - 5040

Product features

Stepper motor is equipped as standard, which can be automatically controlled by the company's motion controller.

The product is small and light in structure, which is suitable for use under light load and low speed, as well as in scientific experiments.

High quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution.

The precision square guide rail is comfortable to move, and has the function of laterally adjusting the guide rail preload and eliminating clearance. It can be used in multi-dimensional combination.

Fine grinding the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail greatly reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the motion.

The platform is equipped with right angle blocks, which can be used vertically or horizontally.

Product specification

Product diagram

The motorized linear stage has good advantages for industries with very high requirements for production work. Its composition mode is based on a working platform and a base. Among them, the main stepping motor and ball screw, the internal structure is very simple, the sliding table with high precision and excellent rigidity, the movement mode is also very direct, and the maintenance and repair are simple.

Precautions for use of motorized linear stage

Pay attention to the inspection during normal use and timely maintenance. When using the electric translation table, you should have a basic understanding of it before using and energizing it. After checking some parts that may have problems, make sure that the product is normal, and then it can be powered on for use. In addition, after use, pay attention to check whether there are any remaining problems. After a certain period of time, the maintenance shall be carried out in time. Even if the equipment is not found to have problems in use during normal use, it should be overhauled regularly.