X Axis Manual Linear Stage , Manual Optical Sliding Table PT110-13-34C

X Axis Manual Linear Stage PT110-13-34C. The main material of the product is made of aluminum alloy, and the linear ball guide is used, and the screw pair is driven. The table size includes 34×34 (13mm stroke), which can be used alone or in multi-dimensional combination.

Product Features

■The guide rail is a fine-ground steel rod with linear balls, and the load is light.

■The displacement adjustment is driven by the fine-grinding and fine-tuning thread pair.

■Micro-feed of the micro-adjustment table.

■The fine-tuning thread pair is placed on the side of the translation table, which is easy to operate.

■Adopt spring return to eliminate axial clearance.

This product is used in optical equipment, measuring instruments, inspection equipment, semiconductor manufacturing equipment, testing machines, microscopes, transfer machines, processing machines, medical equipment, printing machines and others.

Product parameters:

Product Dimension Map

What should I pay attention to when using a manual slide?

1. Use two secure screw holes or mounting brackets below to directly or additionally protect or use other machines according to the needs of equipment in the field and tool installation area.

2. Pay attention to the angle of the traction rope when installing, that is, try to make the mechanism from the rope outlet to the moving part of the traction rope slide linearly during operation, and try to keep the angle deviation to a minimum to ensure the measurement accuracy and the service life of the cable , When the long stroke is vertically installed, it is recommended to install the winch body at the lower part and pull the hoisting rope upward.

3. The traction rope itself is made of stainless steel and fluorine coating. Do not let it be subjected to external force, burning, cutting and impact: there are too many debris, dust or items enough to damage the cable stored at the inner pulley or the outlet. The cable will be damaged and the operation will fail.

4. If it is not installed in front of the stable seat or manual sliding table, it is forbidden to pull out the wire rope by hand or other products, so that it will bounce back instantly, which will cause the wire rope to break and damage the body structure and personal safety.

5. If the mechanism is used for non-linear motion, please install appropriate pulleys for operation and link the curve motion with the linear motion. If it is used in harsh environments or special occasions, please assemble the protective mechanism by yourself.