Volumetric Graphics Simulating a 3D Effect Projector LED Audience Blinder Light for Stage

Electronics and Features:

-LCD Display control panel

-Several DMX selectable configurations (5, 49 ,54 channels) for pixel2pixel or basic controlling:

-5 channels: Dimmer, strobe, auto, auto speed, dimmer curve

-49 channels: Dimmer (x49 pixels)

-54 channels: Dimmer (x49 pixels), auto, auto speed, master dimmer, strobe, dimmer curve

-Both DMX and Art-Net control protocol supported

-Auto mode: built-in programs with execution speed adjustment

-Master/Slave mode: for synchronized operation of more units linked in a chain

-Linear and “stepless” transition between DMX values

-Flicker free operations (400Hz)

Structure and Power Supply:

-Sturdy die-cast aluminum

-Internal Protection: IP20

-Natural air convection

-Bracket for truss rigging and hardware for connection of more units

-Vertical rig up to 24 units

-Power unit: 100-240V 50/60Hz

-IN/OUT power wiring and signal through connections XLR3p/Powercon

-Average power consumption: 175W (power output up to 12 fixtures)

-Weight: 7,5 kg
Dimensions (WxHxD): 500x500x81mm

Introsuction:

HALUPIX is a LED matrix module capable of projecting volumetric graphics, simulating a 3D effect. The cutting-edge optic design combines warm white 2800K° LED source with special optic reflectors which allow a unique reproduction of 8° tight light beams. The generated effect is a wall of LEDs, performing a long through projection of sharp beams in the air which are brighter than conventional LED screens. HALUPIX is a matrix composed by 7x7 high efficiency CREE LEDs with dimensions of 50x50 cm and on-board modular rigging system to build wall or matrix in every sizes.The innovative electric design and the quality of components and drivers applied offer a stepless and linear dimmer, useful to perform
same dimming curve of halogen fixtures, allowing its fitness for theatrical application or wherever is required high performance dimming capabilities.HALUPIX is an ideal tool for rental companies: superslim design, lightweight, user friendly, power supply and control electronics are on board and it doesn't need any external driver. The user interface comes through a graphic LCD display for user settings, diagnostic and addressing through both supported DMX and Art-Net protocols.