LOW LOSS OM3 MPO TO 12 * FC 2 METER MPO FANOUT PATCH CABLE CORD
Connector type | FC(SC/ST/LC/E2000 optional) | Polish type | UPC |
Fiber mode | 50/125μm | Wavelength | 850nm |
Fiber count | 12 fibers | Cable jacket | LSZH |
Fiber grade | OM3 | Minimum bend radius(mm) | 60D(Dynamic)/30D(Static) |
Insertion loss | ≤0.3dB | Return loss | UPC≥50dB |
Trunk diameter | 3.0mm | Breakout diameter | 2.0mm |
Jacket color | Aqua | Tensile loads(N) | 60N(long term)/100N(short term) |
Operating temperature | -20-+60℃ | Storage temperature | -20-+60℃ |
Key features
◆ MPO female to 12 x FC simplex harness cable
◆ 50/125μm 10G OM3 Fiber
◆ 100% factory tested with IL/RL testing result label stuck on package
◆ Comply with EIA/TIA 604-2
◆ Good repeatability and interchangeability
Main applications
◆ 40G and 10G interconnect
◆ High-density fiber card edge access
◆ 100G QSFP28 SR4 to 25G SFP28 SR, or 40G QSFP SR4 to 10G SFP+ SR transceiver interconnection
◆ Data center main, horizontal, zone and equipment distribution area trunk cables
Geometry Parameters
FC/LC/SC UPC |
Item | Pass/Fail |
Parameters | Min | Max |
FC ROC | 10.00mm | 25.00mm |
LC ROC | 7.00mm | 25.00mm |
Fiber Height | -100.00nm | 50.00nm |
Apex Offset | 0.00μm | 50.00μm |
FC/SC/LC APC |
Item | Pass/Fail |
Parameters | Min | Max |
ROC | 5.0mm | 12.00mm |
Fiber Height | -100.0nm | 50.0nm |
Apex Offset | 0.00μm | 50.00μm |
APC Angle | 7.700deg | 8.300deg |
Key Error | -0.500deg | 0.500deg |
Q&A
1. Q: Could you supply duplex connector for the pre-terminated cable?
A: Yes. The breakout legs' tubes can be duplex zipcord and terminated with duplex LC or SC or other connectors. But this is not available for 0.9mm diameter branch.
2. Q: How can I identify different channels, cuz there are a lot of branches?
A: Please don't worry. We will add the number rings to the branch tubes to help you identify them. And sometimes the branch tube can be colorful, then you could identify them by color.
3. Q: How long is the breakout legs? Could I customize it?
A: The breakout legs are 0.5M by default. Of course you can customize it to fulfill the end side application.
4. Q: Is this 0.5M branch length included in the total cable length?
A: Yes, you are right. The total length is the distance from the connector ferrule of A side to the ferrule of B side. So the total length includes the branch length. Don't worry about that. We will offer you our drawing for confirmation before production.