Microns OS2 Singlemode MTP MPO Patch Cable Riser Rated PVC Jacket
9/125 OS2 Singlemode MTP/MPO Fiber Patch Cable Riser Rated PVC jacket
With this MTP/MPO fiber cable, you are ready for deployment in any singlemode 9/125 MTP/MPO network. Singlemode 9/125 cables are best used for long cable runs and the push-on connectors hold them securely in place. This singlemode, MTP/MPO fiber cable is comprised of 12 fibers or 6 duplex channels within each connector. These high density cables are perfect when you have limited space and but still want that great fiber connection. It has a yellow, riser rated, PVC jacket.
Features of OS2 SM MPO-MPO Patch Cord
Connector 1: MTP/MPO Female
Connector 2: MTP/MPO Female
Singlemode
9/125 Microns - OS2
Immune to Electrical Interference
100% Optically Inspected and Tested for Insertion Loss
Jacket: OFNR (Riser-rated)
Applications of 12F MPO to MPO Trunk Cable
Fiber Network Deployments
Fast Ethernet
Gigabit Ethernet
Other Data Applications Requiring High Transfer Rates
Specification
1. Operating & Storage Temperature
| Parameters | Min | Max | Unit |
1 | Operating Temperature | -40 | 70 | °C |
2 | Storage Temperature | -40 | 70 | °C |
2. Geometry Parameters
Measurement | Pass/Fail Limits | |||
Parameters | Min | Max | ||
Radius of Curvature | Long Axel | 2000nm | ∞ | |
Short Axel | 50mm | ∞ | ||
Angle | Long Axel | -0.2° | 0.2° | |
Short Axel | APC | 7.8° | 8.2° | |
PC | -0.2° | 0.2° | ||
Fiber Height | 1000nm | 3000nm | ||
Different Fiber Height | N/A | 500nm | ||
Adjacent Fiber Height | N/A | 300nm | ||
Ferrule Length | 7.9mm | N/A |
3. Optical Performance
Optical Performance | |||||
Item | Parameters | ||||
MTP/MPO Connector | SM (1310nm/1550nm) | MM (850nm) | |||
Standard | Low Loss | Standard | Low Loss | ||
Insertion Loss | Typical | 0.50dB | 0.20dB | 0.50dB | 0.20dB |
Maximum | 0.70dB | 0.35dB | 0.70dB | 0.35dB | |
Return Loss | ≥60dB for APC | ≥20dB for PC | |||
≥40dB for PC | -- | ||||
Male/Female | Male: with Pins, Female: without Pins |
Standard Package
Product Advantages
◆ We passed many quality system vertification, like ISO, RoHS; and passed the Supplier Audition of the key account.
◆ We have a high production capacity. Standard patch cord capacity is 15,000 connectors/day and MT product capacity is 3000 connectors/day.
◆ Our testing standard is much rigorous. Every cable is tested individually in our production line as well as 100% tested by the QC department.
◆ Our service is qualified. We insist on responsive and knowledgeable service to each customer.
Choose Your Polarity
ORC QC Process Flow Chat
Frequent Q&A
Q: Are MTP and MPO cables the same thing?
A: MTP and MPO cables are essentially the same thing. MPO is the generic name for the connector type while MTP is a registered trademark name and design from Us Connec. The two connector types are backwards compatible and work with all MTP/MPO cassettes and patch panels. The main difference is that MTP was designed for superior mechanical and optical performance over MPO.
Q: What is the difference between OM1 OM2 and OM3 fiber?
A: OM2 can be run further with less loss than OM1 fiber. OM3 fiber can run even further than OM2 cables with less loss. OM3 fiber cables have a bandwidth of 2000 MHz*km. They can support 10GB transmissions up to 300 meters and 40/100GB transmissions up to 100 meters.
Q: Can I use any fiber patch cable in my network or do I have to order a specific type?
A: Whenever you need to add more fiber to an existing network you must match the mode (single mode or multimode) micron size (62.5/125 or 50/125) and connector type.