12F Pre-terminated multi fiber cable LC - LC OM3-300 LSZH cable
ORC manufactures a broad range of factory terminated and tested multi-fiber cable assemblies. These assemblies are available in various fiber types and counts, cable constructions and connector options. Pre-terminated fiber optic cable assemblies are suitable for horizontal or vertical deployment in a range of applications.
Pre-terminated cables offer the advantage of reduced time and cost associated with on-site cable breakout and connector terminations. They are ideally suited where narrow installation time-frames are applicable.
Features
◆ Wide variety of cable and connector options available
◆ Installation requires no consumables, termination tool kits or specialized termination training
◆ Factory installed pulling eyes available
◆ Armored cable assemblies available with integral bonding wires
◆ Fully tested labeled and documented
Application
◆ 40/100G Optical Modules Connectivity
◆ Interbuilding and intrabuilding backbones for LAN Premise and Campus applications
◆ Data center main, horizontal, zone and equipment distribution area trunk cables
◆ Telecommunication Network
◆ Industrial&Military
Specification
1. Operating & Storage Temperature
| Parameters | Min | Max | Unit |
1 | Operating Temperature | -40 | 70 | °C |
2 | Storage Temperature | -40 | 70 | °C |
2. Optical Performance
LC/FC/SC Connector |
Item | SM | MM |
| 1310nm/1550nm IL(dB) | 1310nm/1550nm RL(dB) | 850nm IL(dB) | 850nm RL(dB) |
PC | <=0.2 | >=50 | <=0.3 | >=25 |
APC | <=0.3 | >=60 | N/A | N/A |
3. Geometry Parameters
FC/LC/SC UPC |
Item | Pass/Fail |
Parameters | Min | Max |
FC ROC | 10.00mm | 25.00mm |
LC ROC | 7.00mm | 25.00mm |
Fiber Height | -100.00nm | 50.00nm |
Apex Offset | 0.00μm | 50.00μm |
FC/SC/LC APC |
Item | Pass/Fail |
Parameters | Min | Max |
ROC | 5.0mm | 12.00mm |
Fiber Height | -100.0nm | 50.0nm |
Apex Offset | 0.00μm | 50.00μm |
APC Angle | 7.700deg | 8.300deg |
Key Error | -0.500deg | 0.500deg |
4. Connector Detail

Product Advantages
◆ We passed many quality system vertification, like ISO, RoHS; and passed the Supplier Audition of the key account.
◆ We have a high production capacity. Standard patch cord capacity is 15,000 connectors/day and MT product capacity is 3000 connectors/day.
◆ Our testing standard is much rigorous. Every cable is tested individually in our production line as well as 100% tested by the QC department.
◆ Our service is qualified. We insist on responsive and knowledgeable service to each customer.
ORC QC Process Flow Chat
FAQ
1. Q: How can you test a single mode jumper?
A: Our single mode patch cables have been tested for end-face inspection, singlemode IL and RL testing.
2. Q: Are these cables compatible with a variety of modules?
A: Yes, LC cables can be compatible with SFP, SFP+(BIDI SFP+), XFP, SC cables can be compatible with BIDI SFP, GBIC, X2 and XENPAK.
3. Q: What's your average lead time?
A: Our lead time is controlled within 5 working days for the regular products. For the MT products, our capacity is 3000 connectors per day.
4. Q: Can you produce according to the samples we send you?
A: Of course, we can produce according to your samples or technical drawings.