MTP MPO Type B OM2 Multimode Fiber Optic Cable LSZH 12 Fiber
12FIBER MTP / MPO OM2 MULTIMODE FIBER OPTIC CABLE
The MPO/MTP Trunk cable is designs for Data Center Applications. It is divided into round cable and flat cable with the outer diameter of 3.0 mm or 4.5 mm. The connector where this cable is terminated on is the so called MPO/MTP connector. MPO/MTP Trunk Cable are factory pre-terminated, tested and packed along with the test reports. Available in 12 core configuration, these space saving assemblies comes with either MTP Male or MTP Female Connectors on both the other end. They are available in lengths of 5, 10, 20, 50, 100 meters, custom lengths are available on request. MPO/MTP Trunk Cables are available in Single mode, Multimode OM1, OM2, OM3 or OM4 with LSZH or PVC Jackets.
Features of MM OM4 MPO-MPO Patch Cord
• Factory-terminated provide consistent quality, high performance and reduce installation time
• 100% tested for low insertion loss performance and high back reflection
• Fiber Count: 12 fiber trunk cable
• Laser-Optimized multimode OM4 fiber
• Type B polarity, used for 40G QSFP eSR4 and 100G QSFP28 SR4 optics
• Optimized performance – available in elite MTP and discrete premium connector upon request
• Each MPO connector is polished according the polished end-face quality specification standard
• Easy connection and disconnection
Applications of 12F MPO to MPO Trunk Cable
Fiber Network Deployments
Fast Ethernet
Gigabit Ethernet
Other Data Applications Requiring High Transfer Rates
Specification of OM2 12 Core MPO-MPO Trunk Cable
Connector Dimensions: 7.75 mm height x 61 mm depth
Jacket material: PVC/LSZH
Jacket OD: 3.0 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Installation Minimum Bend Radius: 4.5 cm (1.8 in)
Long-Term Minimum Bend Radius: 3.0 cm (1.2 in)
Attenuation at 850 nm: 3.5 dB/km
Attenuation at 1300 nm: 1.0 dB/km
Maximum Connector Loss: 0.70 dB
Typical Return Loss: -22 dB
Operating Temperature: -20°C to +70°C
Please Note: Attenuation testing performed in accordance with EIA/TIA-455-171A.
Geometry Parameters
Measurement | Pass/Fail Limits | |||
Parameters | Min | Max | ||
Radius of Curvature | Long Axel | 2000nm | ∞ | |
Short Axel | 50mm | ∞ | ||
Angle | Long Axel | -0.2° | 0.2° | |
Short Axel | APC | 7.8° | 8.2° | |
PC | -0.2° | 0.2° | ||
Fiber Height | 1000nm | 3000nm | ||
Different Fiber Height | N/A | 500nm | ||
Adjacent Fiber Height | N/A | 300nm | ||
Ferrule Length | 7.9mm | N/A |
Optical Performance
Optical Performance | |||||
Item | Parameters | ||||
MTP/MPO Connector | SM (1310nm/1550nm) | MM (850nm) | |||
Standard | Low Loss | Standard | Low Loss | ||
Insertion Loss | Typical | 0.50dB | 0.20dB | 0.50dB | 0.20dB |
Maximum | 0.70dB | 0.35dB | 0.70dB | 0.35dB | |
Return Loss | ≥60dB for APC | ≥20dB for PC | |||
≥40dB for PC | -- | ||||
Male/Female | Male: with Pins, Female: without Pins |
Standard Package
Product Advantages
◆ We passed many quality system vertification, like ISO, RoHS; and passed the Supplier Audition of the key account.
◆ We have a high production capacity. Standard patch cord capacity is 15,000 connectors/day and MT product capacity is 3000 connectors/day.
◆ Our testing standard is much rigorous. Every cable is tested individually in our production line as well as 100% tested by the QC department.
◆ Our service is qualified. We insist on responsive and knowledgeable service to each customer.
Choose Your Polarity
ORC QC Process Flow Chat
Frequent Q&A
Q: Are MTP and MPO cables the same thing?
A: MTP and MPO cables are essentially the same thing. MPO is the generic name for the connector type while MTP is a registered trademark name and design from Us Connec. The two connector types are backwards compatible and work with all MTP/MPO cassettes and patch panels. The main difference is that MTP was designed for superior mechanical and optical performance over MPO.
Q: What is the difference between OM1 OM2 and OM3 fiber?
A: OM2 can be run further with less loss than OM1 fiber. OM3 fiber can run even further than OM2 cables with less loss. OM3 fiber cables have a bandwidth of 2000 MHz*km. They can support 10GB transmissions up to 300 meters and 40/100GB transmissions up to 100 meters.
Q: Can I use any fiber patch cable in my network or do I have to order a specific type?
A: Whenever you need to add more fiber to an existing network you must match the mode (single mode or multimode) micron size (62.5/125 or 50/125) and connector type.