2.0mm FTTX MPO MTP Patch Cord Single mode Multi mode for Data Center Solution
Type | Singlemode APC | Multimode | |||||||||||||
Performance | Standard Loss | Low Loss | Standard Loss | Low Loss | |||||||||||
Insertion loss | Maximum Value | ≤0.7dB | ≤0.35dB | ≤0.5dB | ≤0.35dB | ||||||||||
Typical Value | 0.4dB | 0.2dB | 0.35dB | 0.2dB | |||||||||||
Return Loss | ≥60 dB | ≥20dB | |||||||||||||
Test Wavelength | 1310nm / 1550nm | 850nm / 1300nm |
1, Used to distribute part or all of the fiber in the relay cable to other areas. can choose to have male or female plugs at both ends
2, Using 12 fiber MTP connectors for termination
3, Round micro-core or kai installed cable to meet different installation needs
4, There are 12 / 24 / 36 / 48 / 72 / 96 and 144 kinds of fibers
5, Pull eye design, suitable for different installation environment
6,According to TIA/EIA and IEC standards, high precision factory pre-termination and testing
Range of Mode | Single mode or Multi mode |
Cable Type | Simplex, Duplex Ziocord. or Multi-cores |
Connector Style | SC, FC, ST, LC, MTRJ, E2000, MU, MPO /MTP.etc |
Polish or Ferrule Interface Type | PC, UPC, APC |
Cable Diameter | 0.9mm, 1.2mm, 1.6mm, 1.8mm,2.0mm, 3.0mm |
Outer Jacket | PVC /LSZH/OFNP |
Jacket Color | SM Yellow | OM1, OM2 Orange | OM3 Aqua | OM4 Aqua or Violet | OM5 Lemon Green |
Durability | 500 cycles(0.2 dB max increase). 1000mate/de mate cycles |
Operating Temp. | -20 ℃ to +70℃/+85℃ (armored) |
Storage Temp. | -40℃ to +85℃ |
MPO/MTP fiber optic patch cord
Application
1. Telecommunication
2. Computer Networks
3. CATV networks
4. Active device termination
Features
1. Low insertion loss and High Return Loss.
2. Fully compliant with standards of IEC and YD-T826/1996.
3. Temperature stability: Operating temperature:-20 to +75°c.
4. High durability,more than 500 times mating.
5. individual package with detail information label.
6. All patch cords are 100% tested.
Ordering information
1. Connector 1.LC,FC,SC,ST,MTRJ,DIN,D4,E2000,MPO.Connector 2.LC,FC,SC,ST,MTRJ,DIN,D4,E2000,MPO.
2. Ferrule interface type:UPC,APC
3. Fiber type;singlemode(G652,G655),MULTIMODE(50/125, 62.5/125),OM3
4. Fober dimeter(mm):Φ0.9, Φ2.0 ,Φ3.0
5. Fiber length:Customized length
Item | Single mode | Multimoe | ||||
PC | UPC | APC | 62.5/125 | 50/125 OM1/2 | 50/125 OM3/4/5 | |
Insert. Loss
| 0.2dB Max. (0.15dB Elite)
| 0.2dB Max. (0.15dB Elite) | ||||
Return Loss | ≥50 dB | ≥55 dB | ≥60 dB | ≥35 dB
| ||
Insert. Loss/MTP or MPO | 0.7dB Max. (0.35 dB Elite.) | 0.5dB Max. (0.35dB Elite.) | ||||
Return Loss s/MTP or MPO | ≥50dB | ≥55 dB | ≥60 dB | ≥20dB
| ||
Pull strength | ≥68N | ≥68N | ≥68N | ≥68N |