MR RO Uf Membrane 8060 Ultrafiltration Module Reducing Water Resistance
Vocee UF membrane Features
1) Membrane material is hydrophilically modified to decrease the transmembrane pressure (TMP), low running cost,large flux,anti-pollution enhanced.
2) Membrane fiber has been treated by physical and chemical,it has High mechanical strength and toughness characteristics,greatly reduce the rate of fiber broken during operating.
3) Membrane fiber both sides are smooth,effectively reduce the adsorption pollution and impurities deposition on membrane fiber surface,greatly improved membrane fiber anti-pollution performance.
4) PH range reaches 2-13,resistant to various acids ,alkali and oxidation,such as Sodium hypochlorite and hydrogen peroxide, etc. Applied to treat different kinds of raw water quality.
5) Produced water SDI < 1(raw water turbidity test values less than 20NTU).
Specification
inflow (L/h) |
40-120 |
material |
PVDF,PVC,PAN |
operating pressure(Mpa) |
0.01-0.1 |
membrane area(m2) |
4.5 |
highest inflow pressure(Mpa) |
0.8 |
operating temperature |
45 ℃ |
PH range |
2-11 |
Virus removal rate(log) |
6 |
Compared with other systems in this field, it has a lot of advantages as follows:
1. With ingenious and compact design, it takes up a small area and has a high automatic performance.
2. Clean and clear filtration water without the problems of olid smell and getting turbid.
3. Adopting automatic control system, including automatic back-washing, needing no one on duty, saving labor cost, solving the problem effectively of the traditional equipments' complicated operation and invalidation due to the operating or protecting improperly.
4. Stable performance, long life time, low running cost.
5. Environment friendly, no second pollution.
6. More than 90% water reuse rate, no natural wastage...