The 2000W CNC optical fiber laser cutting machine imported from Germany is used for fast speed and accurate data.

3.High quality slides

Free and smooth push and pull, good load bearing force, small slide resistance, long service life, drawer smooth.

4.Large space for storage.

The middle partition can be adjusted freely to avoid congestion and clutter, and the space can be organized in a more orderly way to meet the daily needs of office storage.

5.Cyber lock or WT lock

1.Reinforced laminate:

Under the high-quality cold-rolled steel laminate, cold-rolled steel reinforcement is adopted to enhance its bearing capacity and make the laminate not easy to be deformed;

2.Thickened baffle plate:
The baffle plate is made of cold-rolled steel plate, which increases the material thickness, has strong bearing force, pressure resistance and is not easy to be deformed.

3.Cabinet materials.

The cabinet is made of high quality thickened cold-rolled steel plate, which is welded and assembled with carbon dioxide gas protection after cold processing. The structure of the cabinet is firm and firm.The surface of the box after rust removal, oil removal, grinding, phosphating treatment after spraying.

4.Phosphorus - free electrostatic spraying.

The surface is smooth, the color is bright, the adhesion ability is strong, not easy to drop the paint, the coating micro hole is small, the anticorrosion performance is high.

5.The structure is smooth and precise.

Precision design, uniform size, precise and smooth stitching, firm structure, stronger load bearing.

6.Cabinet materials.

The cabinet is made of high quality thickened cold-rolled steel plate, which is welded and assembled with carbon dioxide gas protection after cold processing. The structure of the cabinet is firm and firm.The surface of the box after rust removal, oil removal, grinding, phosphating treatment after spraying.

Inspection System: Checking quality before packing.

Packing: Packing with carton box or wooden box and PE foam.

Delivery: Transport to destination port by professional van.

Documents Cabinet Main Manufacturing process

1. Material cutting: use the plate shears to cut out the required sizes of cold-rolled steel plates (back plate, side plate, door plate, roof plate, exit plate, layer plate, etc.).
2. Stamping: use the punch machine to punch out the corner edge, handle and other positions that need to be reserved.
3. Bending: use the bending machine to fold the inside and outside edges.
4. Welding: reinforce with spot welding machine.
5.Polished: the surface of the solder joint polished, is smooth surface without burr.
6. Pickling and phosphating: put the welded file cabinet down the chemical tank for oil removal and rust removal.
7. Spray molding: semi-finished products enter the spray table and are sprayed with static electricity.
8. Assembly: assemble door, handle, key and other accessories.
9.Inspection: inspection by inspectors

10.Finished product: wrapped in paper.