Explosive Detector NO NO2 Nitric Oxide Nitrogen Dioxide Pump Suction ATEX CE

YT-95H-WH-B is newest fixed multi gas detector with built-in pump, wand have 4G wireless solution, the max gases is 6 gases(Single, 2 in 1, 3 in 1, 4 in 1, 5 in 1, 6 in 1.).

1. Multiple transmission signals and output

With full software automatic verification function and zero calibration function, making gas monitoring more accurate and more reliable.
Standard 4-20mA, RS485 signal, 1 set of relay signal output, optional 2 sets of relay signal.
With sound and light alarm function, there is sound and light alarm when reaching the alarm point.
For the harsh environment with high temperature, high humidity and high dust, a pretreatment system can be selected to cool down, dehumidify and remove dust to protect the service life of the detector.

2. With internal suction pump, fast response

With a built-in constant flow and large suction pump, which is accurate in detection, and has a faster and more sensitive response than diffusion models.

3. Can detect multiple gases, multiple numerical display

Up to 6 kinds of gases can be detected at the same time. In complex and multi-gas environments, multiple installations can be reduced, saving time and effort.
2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
Supports ppm, mg/m3 display units. Units can be switched arbitrarily, and the concentration value is automatically converted by the device.

4. Can support wireless transmission (optional)

With optional wireless module(4G & Rola), data can be uploaded to the cloud platform, environmental protection bureau or other platforms, providing SMS reminder function, the transmission signal is not limited by distance, and can be viewed in real time on mobile phones and computers.

Explosive Detector Specification