MS600-VOC Portable Multiple Gas Detector
MS600 Series Portable composite gas detector can be used in mobile rapid and accurate detection of a variety of gas concentrations and measurement of environmental temperature and humidity.
Real-time detection or timing detection is supported; when no detection will be done, it is possible to shut down the pump so as to extend the startup time.
Multiple alarm modes, and multi-directional and three-dimensional indication alarm states. It includes sound & light alarms, vibration alarms, and display screen visual alarms.
Alarm types include concentration alarms, under-voltage alarms, and failure alarms.
Multiple alarm mode settings: low alarm, high alarm, interval alarm, and weighted average alarm.
Mis-operation recognition function: automatic recognition and prevention of the concentration calibration misoperation, which is possible to avoid the poor performance that may be caused by human factors.
Gases to be detected | VOC, and so on.Optional configuration: temperature and humidity measurements. | ||||
Detection range | 0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized. | ||||
Detection principle | Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, and so on. Depending on the type of gas, range, field environment and user demand. | ||||
Allowable error | ≤±1% F.S (other precision levels can be customized) | ||||
Response time | T90≤20 seconds | Recovery time | ≤30 seconds | ||
Sample gas temperature | -40 ℃ ~ + 70 ℃, and the optional configuration of high-temperature sampling and cooling filter handle will be possible to detect the smoke gas at the temperature of 1300 ℃. | ||||
Power supply | 3.6VDC, 6000mA high capacity rechargeable polymer battery | ||||
Display mode | 2.5-inch high-definition color screen | ||||
Detection mode | Built-in pump-suction type measurement, and flow rate at 500 ml / min. Calibration flow rate should be greater than 500 ml/min, the three-way pipe should be connected, so as to ensure that the excessive gas will be discharged from the bypass | ||||
Communication interface | USB (charging and communication), optional: RS232, infrared communication, automatic recognition | ||||
Data storage | Standard configuration is the data storage capacity for 100, 000 entries; SD card storage function is optional configuration | ||||
Protection level | IP67 | ||||
Explosion-proof mark | Exia II CT6 | ||||
Exterior dimensions | 180×78×33mm (L×W×H) | ||||
Weight | 350g | ||||
Standard accessories | Manual, qualification certificate, warranty card, USB charger (including the data cable), high-grade aluminum instrument case, belt clip, humidity dust filter |
The detector is widely used in the petroleum, chemical industry, environmental protection, metallurgy, refining, biochemical medicine, agriculture, and explosion prevention.