MiniGas Single Gas Detector
MiniGas is small, sturdy, ergonomic, and can be attached to a work coat or cap with alligator clips for easy carrying. It offers up to 2 years of protection with no need for calibration, sensor replacement, battery replacement, or battery charging. It’s IECEx, ATEX, and CNEX explosion-proof certificated and meets the highest standards of quality and reliability to ensure workers’ safety and compliance. MiniGas can detect toxic and harmful gases like carbon monoxide, hydrogen sulfide, oxygen, and sulfur dioxide, other toxic gases can be customized, and which is widely used in petroleum, petrochemical, metallurgy, chemical, and other industries for gas detection and personnel protection.
Gas Type | Harmful and toxic gas |
Sampling method | Diffusion |
Detection range | 0-100 ppm |
Resolution | 0.1ppm |
Accuracy | ≤±3%FS or ±10% (depending on the specific sensor) |
Response time | ≤30s(T90) |
Principle | Electrochemical principle |
Unit | PPM, mg/m3, %VOL, μmol/mol |
Display | Gas name, concentration unit, measured value, electricity |
Alarm mode | Sound, light, vibration alarm, high and low alarm values can be set by yourself |
Alarm type | Low alarm, high alarm, STEL, TWA, low battery |
Power supply mode | 3.6V dry battery (non-removable and rechargeable) |
Explosion-proof | Grade ExiaIICT4Ga |
Protection class | IP68 |
Working temperature | -20℃~55℃ |
Working humidity | 0-95%RH (non-condensing) |
Dimensions | 90*60*33mm |
Weight | 125g |
The detector is widely used in petroleum, chemical industry, environmental protection, metallurgy, refining, biochemical medicine, agriculture, and explosion prevention.
The detector can effectively predict the concentration of dangerous gas alarms, ensuring that staff life's safety is not threatened, and production equipment is not lost.