10m × 12m Plastic Single Tunnel Greenhouse For Growing Vegetables

Single Tunnel Greenhouse describe:

The Single Tunnel Greenhouse can prevent crops from being blown by wind and rain, and provide a good growth environment for the crops. Moreover, the construction cost is low, the installation is simple, Single Tunnel Greenhouse is suitable for most rural planting needs.The technical steel frame structure makes the greenhouse stronger, and the plastic film cover can better absorb sunlight, provide good light for crops, and save energy.

Single Tunnel Greenhouse parameters

Single Tunnel Greenhouse structure

1. The overall size of the Single Tunnel Greenhouse

Such greenhouses have different structural dimensions in different countries. But on the whole, the general greenhouse span is 6m~12m, the bay is about 4m, and the eaves height is 3~4m. For multi-span greenhouses with natural ventilation, when the side windows and ridge windows are used in combination, the maximum width of the greenhouse should be limited to less than 50m, preferably about 30m; while for the multi-span greenhouses with mechanical ventilation, the maximum width of the greenhouse can be Extend to 60m, but it is best to limit it to about 50m; for the length of the greenhouse, (from the perspective of easy operation), it is best to limit it to 100m, but there is no strict requirement.

2. Main structure of Single Tunnel Greenhouse

The main structure of the Single Tunnel Greenhouse generally uses hot-dip galvanized steel pipe as the main load-bearing structure, factory production, and on-site installation. Because plastic greenhouses are light in weight and have weak resistance to wind and snow loads, the overall stability of the structure must be fully considered. Generally, vertical diagonal braces should be installed in the second span or second bay indoors. Necessary space support should also be considered on the envelope structure and the roof. It is best to have diagonal supports (oblique tie rods) anchored to the foundation to form a spatial force system.
The main structure of the plastic greenhouse must have the ability to resist wind of at least 8 grades, and generally require wind resistance of grade 10.
The snow load carrying capacity of the main structure should be determined according to the actual snowfall conditions in the construction area and the winter usage of the greenhouse. For use in the north, the design snow load should not be less than 0.35kN/m².
For the annual operation of the plastic greenhouse, multiple load factors such as equipment weight, plant lifting weight, maintenance and other load factors should also be considered.

FAQ

1. Minimum Order Quantity?
The MOQ is 1 tons, the galvanized steel sample is available as long as your quantity is ok.
2. What kind of terms of payment?
T/T, credit card are available.
3. What grams of the product can you offer?
These products can be customized according to your requirement.
4.Is free sample available?
Yes, free sample is available.
5. Can you do Customization & Reproduction if I provide a photo?
Yes, we do Customization & Reproduction service.
6. Does the packaging safe and arrive in good conditions?
Yes, safe Packing guarantee , all the products will arrive your door under good conditions.
We response to problem of shipping if there unfortunately is.
7. How long does it usually take to deliver the product?
We will make the shipment to you immediately. It will take about 18 to 40 days arrive worldwide. It depends on the specific quantity