Aerodynamics Design Carbon Filter Dust Mask Easy Breathing / Speaking

Descriptions

The mask of FFP1V Dust Mask is light and comfortable. The internal nosepiece is made of velvet/sponge double-layer. There are no exposed metal components; the external nosepiece used to adjust the mask on the face is metal coated. Structure and materials are long lasting and avoid the collapse in humid environments.

Advantages

1.The disposable particulate respirator is designed to help provide quality, reliable respiratory protection for the professional.
2.Advanced electrostatically charged microfibers which make breathing easier and cooler.
3.The proprietary Exhalation Valve reduces heat build-up inside the respirator to help keep the wearer more comfortable.
4.The soft inner material provides added comfort while the soft nose foam and adjustable nose clip help provide a custom fit.
5.These features are designed to enhance user comfort and help increase wear ability.

Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

Material of each layer

1st layer : Protective pp spun-bonded non-woven

2nd layer : Active carbon filter(MX-3006)

3rd layde : FFP1 melt blown filter(have filter efficiency level of 80%)

4th layer : Shaped needle punched cotton

FAQ

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.