Anti Fog Disposable FFP1 Dust Mask Facial Protective Adjustable Aluminum Nose Clip

1 . Descriptions

FFP1V Dust Mask with adjustable aluminum nose clip makes wearing more seal less leakage . With latex-free elastic strap , soft nose liner , softer and fit the face . Easy-breathing valve makes breathing more smooth .

2 . Mask CE Quality Standards

1 . Stardard : EN : 149 : 2001 + A1 : 2009

2 . Test Machine : TSI 8130

3 . Test Flow : 95Liters/Min

4 . Test Medium : NACL & DOP

3 . Material of each layer

Outer layer : Protective PP spun-bonded non-woven

Middle layde : FFP1 melt blown filter(have filter efficiency level of 80%)

Inner layer : Shaped needle punched cotton

4 . Certification

This product has been tested according to the following European Standard:

EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.

It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.

EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

5 . Directions for use

1. Fit the respirator and check leak-ight ness BEFORE en ten ng the contaminated area

2. Wear the respirator for the whole duration of exposure to contaminants.

3. Use the respirator in accordance with applicable health and safety regulations.

4. Discard the respirator and replace with a new one if*the respirator is re roved while in acontaminated area*excessive clogging of the respirator causes breathing dii culty ordiscomfort*the respirator becomes damaged*(for respirators protecting against vapours-thesmell of vapours present becomes detectable.

5. Leave the contaminated area if dizziness, irritation or other distress occurs.

6. Only for single use, No maintenance necessary.Do not store and/or re-use after single use.m Discard the respirator after single use(one shift, maximum) .

7. Keep un-used respirators in their closed box and store in a dry non-contaminated areabetween+2 and+55deg.

6 . Packing

Normal Packing12pcs/box,240pcs/ctn

7 . Advantages

• Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibres.
• Embossed fringe seal avoids fluffy open layer around the edges. Latex-Free synthetic rubber headstrap.
• Contour design ensures the compatibility of glasses/goggles and reduces fogging.
• Soft nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
• Light wear and comfortable. Contour fit.Easy breathing/Speaking. Clear vision. Free maintenance (disposable item).
• Better breathing provided by the exhalation valve.
• The ISO 9001 / ISO 14001 certified production guarantees the reliability / regularity of the production and the control of the environmental impact.