Single Use Only FFP1 Dust Mask Respirator Easy Breathing / Speaking High Filtration

1 . Descriptions

2 . Material of each layer

Outer layer : Protective pp spun-bonded non-woven

Middle layde : FFP1 melt blown filter(have filter efficiency level of 80%)

Inner layer : Shaped needle punched cotton

3 . Mask CE Quality Standards

1 . Stardard : EN : 149 : 2001 + A1 : 2009

2 . Test Machine : TSI 8130

3 . Test Flow : 95Liters/Min

4 . Test Medium : NACL & DOP

4 . Features:

1. 100% brand new and high quality.

2. Elasticated headband: Elastic ear-loops with no pressure to the ears.

3. Anti-fog and dust-proof, face Protective Mask.

4. Close fit to prevent polluted air from entering.

5. Electrostatic filter material, effectively protect the mask of PM2.5.

5 . Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.

​

6 . Expiry date

If maintained as per storage instructions , product can be used up to 5 years from date of manufacture.

7 . Packing

Normal Packing 20pcs/box,400pcs/ctn