Ferrite tester FMP30 ferritic content measurement in pipes, boilers and containers HFE-100

Ferrite content is critical when austenitic or duplex steels must withstand high temperatures, corrosive substances, and pressures. Especially when it comes to field measurements in chemical plants, energy facilities, and factories, the advantages of handheld devices can be significant. FERITSCOPE FMP30 provides a variety of probes through which ferritic content can be reliably measured even in hard-to-reach areas.

Durable and convenient equipment for rapid and accurate determination of ferrite content in the field

Measurements are shown as ferritic percentage (% Fe) or ferritic volume content (Fe)

Easy reading of large display screen, comprehensive functions

The probe is activated after automatic love is measured

A variety of probes are provided for reliable measurements even in hard-to-reach areas

A variety of calibration materials are available

The entire measurement area needs only one calibration

It can also be used as the module of desktop measuring instrument with complete functions

Application:
Ideal for ferritic content measurement in pipes, boilers and containers

Feature

LC-display,

Two display modes (SAVE and FREE).

Two units — Fe% and FN (WRC number).

Statistics display together with measurements.

Built-in Rs-232 interface for printer1

Compose

Please check the packing for external signs of damage if the instrument is in any way damaged,keep the packaging material in order to claim against the transport company· The carton should

contain the following:

HFE-100 machine with Probe

Option if need

Operating manual

— Two equivalent standards

— Carrying - case 270X240X90mm

Display

As show in Fig 1, current value displayed together with mean value, max value, min value, standard deviation value. HFE-100 supplies a convenient for users. The meter contains 4 application blocks (0~3). There are 10 pages in each block, 50 data in each page.

1. Preface

In the chemical industry the stress-bearing members of containers,pipes,reactor vessels and other plant are usually made of austenitic steel or duplex steel or cladding of austenitic chromium-nickel steel．The residual ferrite content must be within a specific range compatible with the mechanical strength requirements or the item concerned．

The HFE100 was developed to facilitate accurate ferrite content measurements On welded seams and cladding items. It gives results that match for the standards of GB/T1954-2008,ISO 8249 and ANSI/AWS A4.2.

2. Feature

● LC-display,

● Two display modes (SAVE and FREE).

● Two units — Fe% and FN (WRC number).

● Statistics display together with measurements.

● Built-in Rs-232 interface for printer(Option if need)

3. Technical data

The meter is mainly used for the determination of the ferrite content

of welded austenitic steel or Duplex or cladding of austenitic

chromium-nickel steel weld.

Range 0.1~80%Fe , ( 0.1~110)WRC-number

Precision ±2%(raneg0.1~30%Fe), ±3%(raneg30~80% Fe)

Operating temperature 5 ~ 40℃

Batteries 9v 6F22

Size: LX WX H 175X100X38mm

Accessories Main unit, probe, two calibration sample piece, carrying-case , operating manua, certificate.