RC434 signal blockers 434MHz Remote Control Jammer for Car Using/ Garage Door Remote Control Jammer

Product introduction

This product is a high power remote control 434MHz wireless transmitter. Within a certain range, wireless signals of the same frequency can be shielded and used specifically for certain occasions that use radio devices for cheating,remote control electronics, remote weighbridges and other cheating, examination rooms, hotels, conferences, etc. making cheating wireless signals invalid. Factory default (default) is set to 434MHz.

Parameter:

Instructions

Open the monitor battery cover and install the 9V battery. Pay attention to the positive and negative of the battery,after the battery is finished, turn the side power switch to on , the monitor is powered on, and press the front button, the blue indicator is on, the monitor transmits a wireless signal of 434MHz. Release the front button, the blue indicator turns off, and the monitor stops working. When using the pull rod antenna is the best when pulled out.

Precautions:

1. Turn off the side power switch when you are not using it for a long time or when you go out for a long time.

2. Please use in a suitable shielded environment, so as not to affect the use of effects.

3. Avoid exposure, rain, water droplets, long-term exposure to high temperature and humidity.

4. The effective range of the instrument is a circular area centered on the main unit. Therefore, when using it, be careful to select the correct position of the instrument so as not to produce a blind corner.

5. This product is sensitive to remote control products. It will shield the remote control signals such as electric cars, cars, remote control doors, access control, etc. Please use it rationally.