High Gain Signal Booster for 4G Mobile Phone/Cell Phone Signal Amplifier System
Brief Description:
This model signal booster 4glte700MHz,with an outdoor donor antenna could receive the signals and bring good signals in a relative good signal sources places and pass the signal to the amplifier and then spread it to where the
Signal is weak. Such as parking lots, basements, elevators and some hotels etc. These products need to be used in remote areas of the mountains.The machine can cover a range of 500-3000 square meters in some places where some signals are relatively simple.If the signal environment is not very good, the coverage area will be small.
Only amplifying the downlink signal will not effect on the operation of the base station.
Features:
Applicable place:
It can be applied in Building rooms there have weak signal of mobile.
Specification TE-730B:
Frequency Range | (Uplink: 703-748MHz; Downlink: 758-803MHz) |
Gain | TE-730B (Uplink)Gp≥75dB (Downlink) Gp≥80dB |
Output Power | TE-730B ≥30dBm 1W |
Pass band ripple | ≤4dB |
Guard band rejection | (BW-60dB)≤120MHz |
(BW-70dB)≤127MHz | |
I/O impedance | 50Ω/N Connector |
I/O return loss | ≤-10dB |
Noise figure | ≤-8dB |
Inter-modulation attenuation(Po=13dBm) | ≤-40dBm |
Transmission | ≤0.5μs |
Ambient | -10℃-50℃ |
Power Supply | AC110-220V±10%/45-55Hz |
Size | 350mm×230mm×60mm |
Weight | 4.5kg |
Reliability | To the GB6993-86 standard |
Electromagnetic | To the ETS300 694-4 standard |
Function | a) Power supply LED denote |
b) Export power LED denote |
Package contents:
1 pcs booster
1 set power supply
1pcs user manual
1 set installation screws