90W High Power 2G3G4GWi-Fi Mobile Phone Signal Jammer/Jamming Range Up to 150M
Description:
This 90W fixed signal shield has a larger output power than the X6S6 series, and the shielding range can reach 150M. This product is suitable for use in some spaces such as offices and churches and the distance you need to shield. Great place. Its aluminum casing is a large heat sink, and it has a built-in fan to ensure it can work 24H/7D. In addition to this signal blocker, we can also customize the remote control function. If you need to remotely control the shield, you can tell us before ordering.
Features:
Applicable place:
Jammer can be used to block the cell phone signal in the churches, museums, movie theatres or during the important conference in a meeting room to avoid the leakage of secure information, in classrooms during the exams, courts, hospitals, banks, recording studios or other crowded places where the usage of mobile phone is prohibited factory, bank, train, car, bus etc.
Specification:
Total Output power | 90W |
RF Output power Each Band | 15W |
Cover Radius | Up to 100 meters radius (Signal≤-85dBm),the coverage range depends on the strength signal in given area. The shielding radius of VHF/UHF signal should be lesser than cell phone signal. |
Power Supply | AC adapter (50 to 60Hz/100 to 240V AC –DC27V) |
Antenna Type | High gain Omni-directional antenna |
Electric Filed (SAR) | Compatible with ICNIRP Standards(Human safe) |
Operating Temp | -20 to +50 degrees Celsius |
Storage Temp | -40 to +60 degrees Celsius |
Optional Function | Remote control on/off (3-5m) |
Dimension(LXWXH) | 335 x 238 x 60mm |
Weight | 10kg |
Adjustable Switcher: Finding the adjustable switch of system’s to adjust each bands RF power output level or turn off without influencing the other bands operation.
Antennas:
Optional Antennas:directional panel antenna / high gain omini-directional
Use directional antenna the transmit antennas should be put at the edges of shielding area
Notices:
1. Before linking all the antennas, power supply shall not be switched on at first. Non taking off antenna when the mainframe is in the working condition.
2. The jammer shall be installed in the position with good ventilation. And large-scale things shall be avoided to ensure to the shielding effect.
3. When use the jammer outdoors, preventing water shall be taken into consideration.
4. Antenna shall be used Vertical to the ground.
5. If you used in car, please make sure the car output adapter is DC27V, this device only can be working on DC24-27V, the minimum output power of storage battery is 350Watt.