VS-124 Mini Wireless Camera Hunter

Full band video scanner

900 ~ 1300 MHz, 2340 ~ 2550 MHz, 5645 ~ 5945 MHz

WiFi IP Camera Detector

2410 ~ 2480 MHz, 5180 ~ 5320 MHz, 5745 ~ 5825 MHz

Specifications * Specification may change without notice.

• Package Contents

  1.	Wireless camera hunter	4.	External power adaptor x 1
  2.	Detachable SMA antenna x 2	5.	Earphone x 1
  3.	AV output cable x 1	6.	Rechargeable batteries x 4(optional)

• INSTALL BATTERY: Battery compartment is located in the rear side. Remove the battery cover, install AAA / UM-4 battery x 4 according to the + – indication, then put on the battery cover. This device is available both dry battery and rechargeable battery. Note: Never connect the battery charger or external power bank when to use dry battery inside.
• SWITCH ON: The power switch is located in the center of right side. Set at 1 to switch on, set at 0 to switch off.
• AUTO SCAN: After switch on, this device will scan wireless video signal from 900 MHz to 6.0GHz automatically. There are 2 rows LED displays under the LCD screen.
• IMAGE DISPLAY: When detects wireless video signal, the image will display on screen and the frequency of the image will appear in the left bottom side of screen. The duration of image display on screen is depended on the video signal strength, the stronger the longer.

• This device keeps scanning, the image will fade away when scan to other frequency and the screen will shut down to save power. When detects next video signal, the screen will light up again to display the image.

• LOCK IMAGE: When detects significant image, press and hold the (+) button in left side over 1.5 seconds to lock the image. When hear beep once, the image is locked. The scan will stop and the blue and screen LEDs will still. The frequency on screen will be fixed and blink in black and white.
• FINE TUNE IMAGE: After image locked, press the buttons + – in left side to tune the image at its best resolution. Press the (+) once, beep once and you will find the frequency in the left bottom side of screen will be increased. Press the (–) once, beep once and you will find the frequency in the left bottom side of screen will be decreased.
• AUDIO DEMODULATION: This is unique technology in its kind. Plug the earphone into the jack in right upper side to hear the audio of image. If you can not hear the audio, press and hold the (–) button in left side over 1.5 seconds to shift the audio frequency.