Hpe Proliant Dl380 Gen10 Plus 8Sff Nc Configure-To-Order Server
Technical Specifications
Processor | Support 2 pieces 2rd generation Intel ® xeon ® Scalable processor, single core up to 40, maximum power 270W |
Number of processors | 2 |
Memory | It supports up to 24 DDR4 memories, a maximum speed of 2933MT/s, RDIMM or LRDIMM, and a maximum capacity of 3TB for a single processor |
Permanent memory | It supports 12 NVDIMM permanent memories with a maximum capacity of 192GB and HPE DC permanent memory with a maximum capacity of 6TB
|
Storage controller | Standard on-board array controller, supporting SATA RAID 0/1/10/5 |
Form factor | 2U |
Power supply type | 800W |
storage |
Supports up to 30 2.5 inch hard drives (24 front+6 rear expansion) Support up to 19 3.5-inch hard drives and 2 2.5-inch hard drives (12 front+4 internal expansion+5 rear expansion) Supports up to 20 NVMe SSDs Support NVMe M.2 SSD
|
network |
Onboard 4-port gigabit network adapter/network card Optional NC model does not include onboard network controller Optional FlexibleLOM Network Adapter Optional standard PCIe slot based network adapter
|
Memory slots | 24 DIMM slots |
Expansion Slots | Standard configuration of 3 PCIe 4.0 slots, supporting up to 8 PCIe 4.0 slots |
Drive description: | 8SFF |
GPU support | Up to 7 single wide GPU cards or 3 double wide GPU cards |
Network controller | HPE 1 Gb 331i Ethernet adapter 4 ports per controller and/or an optional FlexibleLOM, depending on model |
Storage controller | HPE Smart Array P440ar/2 GB controller plus Smart Storage Battery |
Infrastructure management | Standard HPE iLO Management with Intelligent Provisioning Optional HPE iLO Advanced and HPE Insight Control |
Warranty | 3/3/3 - Server Warranty includes three years of parts, three years of labor, three years of onsite support coverage. Additional information regarding worldwide limited warranty and technical support is available at: http://h20564.www2.hpe.com/hpsc/wc/public/home. Additional HPE support and service coverage for your product can be purchased locally. For information on availability of service upgrades and the cost for these service upgrades, refer to the HPE website at http://www.hpe.com/support |
Chassis Types
8 SFF with options for aditional 2 SFF drive bays: 12G x1 SAS/SATA, 24G x4 Tri-Mode or 16G x4 NVMe
4 LFF
System Fans
Single rotor hot plug fans by default
Notes: −Optional High Performance Fan Kit available (includes 7 fans). − The DL360 Gen10 Plus will support up to 7 fans with fan redundancy built in. One fan rotor failure will place server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent server shutdown.
Processor -- Up to 2 of the following, depending on model.
Example
Internal Storage Devices
Optical Drive
Available on 8 SFF and 4 LFF CTO Servers as an option (DVD-ROM or DVD-RW)
Hard Drives None ship standard
↓
8SFF HDD within DVD like this pictures
Storage Controllers
NVMe Boot Devices
HPE DL36X Gen10 Plus x16/x8 M.2 NS204i-r Riser
HPE NS204i-p NVMe PCIe3 OS Boot Device
Software RAID
HPE Smart Storage SR100i SR Gen10 Plus SW RAID
Notes:
−All models feature an embedded storage controller, capable of operating on AHCI or SR100i modes, with embedded software supporting RAID for either up to 14 SATA drives or 2 NVMe SSDs. In addition, all models feature 2 x8 PCIe 4.0 connectors per socket for NVMe SSDs, which must be used on SR100i mode. NVMe SSDs are qualified on SFF models only.
− HPE Smart Storage SR100i SR Gen10 Plus SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select Legacy mode setting (758959-B22).
− HPE Smart Storage SR100i SR Gen10 Plus SW RAID is off by default and must be enabled.
Graphics
Integrated video standard
Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)
16 MB Video Memory
HPE iLO 5 on system management memory
32 MB Flash
4 Gbit DDR3 with ECC protection
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes: Available in 94% efficiency.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes: −Available in 94% and 96% efficiency. −Also available in -48VDC and 227VAC/380VDC power inputs.
HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit Notes: −Available in 96% efficiency. − Low-line environment maximum outputs are 1000W with 12A rated power cord, or 900W with 10A rated (default).
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes: Available in 94% efficiency. − 1600W Power supplies only support high line voltage (200 VAC to 240 VAC).
The HPE ProLiant DL380 Gen9 Server delivers the latest performance and expandability. Reliability, serviceability and near continuous availability, backed by a comprehensive warranty, makes it ideal for any server environment. Deploy the data center standard. Designed to reduce costs and complexity, leveraging Intel’s latest E5-2600 v4 processors with 21%2 performance gain, plus the latest HPE 2400 MHZ DDR4 SmartMemory supporting 3.0 TB and up to 23%3 performance increase. Supporting 12 Gb/s SAS, 40 Gb NIC with broad range compute options. HPE Persistent Memory, the world’s first NVDIMM optimized on ProLiant, offering unprecedented levels of performance for databases and analytic workloads. Run everything from the most basic to mission critical applications, and can be deployed with confidence.
HPE DL380 Gen10 server
Our service:
warranty:3 years
packaging details:original HPE packing
delivery time:shipped in one day after payment
FAQ