Giant 335cm 365cm Inflatable Stand Up Paddle Board Oem, Isup Inflatable Paddle Board

Product description

Package Includes:
1 x Inflatable paddleboard
1 x Hand pump
1 x Adjustable floating paddle
1 x Removable center fin
1 x Coil ankle leash
1 x Backpack
1 x Repair kit

BOARD:
Size (fully Inflated): 10′ Long 32″ Wide 6″ Thick
Size (rolled up): 35″ Wide 12″ Diameter
Capacity: 275 lbs
Material: Military-grade PVC, EVA, High-Density Drop-stitch
Weight: 17.2 lbs

PADDLE:
Adjustable length: 5.4 ft to 7.0 ft

More Details:

​FAQ:

1, How do I inflate my paddleboard quickly?
Get an inexpensive electric pump for mattress inflation sold in local retail stores. We recommend the Rechargeable pump. Use it to inflate paddle board to about 80% quickly, and then finish pumping to high pressure with provided hand pump.

2, How do I use the hand pump to bring the inflatable paddleboard to high pressure?
When using the hand pump to inflate the paddleboard do not use only your hands and arms when the pressure gets higher. Use your body weight to push the handle of the hand pump down. Bend at the knees and lock your arms straight while putting all of your weight over the handle.

3,Why is air escaping from the valve as soon as the valve adaptor is disconnected?
Make sure that the pushpin inside the valve is locked in the upper position before you start pumping air into the board. When the valve push pin is in the upper position, it means that the valve is locked, and no air will escape when the valve adaptor is disengaged.

4, How do I deflate the paddleboard?
Open the valve cover, press slightly on the pushpin inside the valve with your finger tip to release some air pressure, then press completely and turn the pushpin in either direction, locking it in the open position. Turn the board fins up. Start rolling the board from the rear with the fins inside

the roll. You can use a rubber bungee cord to wrap around the board to keep it from unrolling.

5,How do I know when the paddle board is fully inflated?
Saturn SOT330/365 paddle boards can take up to 12-15 psi of air pressure. SUP330/365 can take up to 15psi. We suggest that you use our high-pressure electric pump that automatically shuts off once full pressure is achieved. If you use a hand pump and the air pressure gauge is available or pump until you feel the board surface become as hard as a rock. If the board is fully inflated, it will not bend under your weight when you are stand up paddling. If you are using the Sunshine board as a sit-on-top kayak, high pressure is not as important as when standing on it. Just inflate the board until it is moderately hard and does not feel soft when you press it with your fingers.

6,How to use the provided hand pump with gauge?
Make sure you read instructions on the hand pump chamber. Apply oil to rubber seals inside pump and aluminum handle. Use double-action option to quickly fill up air chamber, then remove white plug and use single-action to finish inflation. Gauge will show air pressure on a down stroke only. If you want pressure gauge to show pressure readings continuously, then please remove rubber seal inside the valve adaptor.

If you are interested in any inflatable products, contact us for a quick response! 24 hours of online support available! Send e-mail to us!