Specifications
Brand Name :
DINGSCO
Model Number :
According to customers requirements
Certification :
ISO 9001:2015,PED 2014/68/EU,API 6A,API-20B,TSG,NORSOK
Place of Origin :
China
MOQ :
Negotiable
Price :
Negotiable
Payment Terms :
T/T
Supply Ability :
Negotiable
Delivery Time :
(Sample Order) 7 days
Packaging Details :
According to Customers' Requests
Product Name :
Nickel Alloy Welding Wire
Grade :
Hastelloy C276
UNS :
N10276
Density :
8.89g/cm3
Melting Point :
1323°C-1371°C
Electrical Resistivity :
1.3microhm-m
Description

Nickel Alloy Welding Wire Hastelloy C276 UNS N10276

Welding wires are slim metallic wires that are usually coiled up in spools. These spools are loaded on a wire feeder and the welding wire is continuously fed through a welding gun into the molten weld pool. As a result, arc welding processes that use a welding wire tend to offer higher deposition rates and faster travel speeds, as compared to TIG and Stick welding where the welder must manually feed the filler metal into the weld puddle.

Hastelloy C276 (UNS N10276) is a nickel-molybdenum alloy withuniversal corrosion resistance unmatched by any other alloy. C276 is also known as Inconel C276 or Hastelloy C276 and is an improved wrought version of alloy C inthat it usualy doesn't need to be solution heat-treatedafter welding and has vastly improved fabricability. Thisaloy is resistant to the formation of grain boundaryprecipitates, specifically in the weld-heat affected zone.This attribute makes it suitable for use in the as-welded condition. It has excellent resistance to both localizedcorrosion and oxidizing or reducing media. Because of itsversatility, it can be used where corrosive conditions are likely to occur or in multipurpose plants.It's native corrosion resistant properties extendto a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media(organic and inorganic),chlorine,formic and acetic acids, aceticanhydride,and seawater and brine solutions.

Applications
Some typical applications include equipment componentsin chemical and petrochemical organic chloride processesand processes utilizing halide or acid catalysts. therindustry applications are pulp and paper (digesters andbleach areas),scrubbers and ducting for flue gas desufurization,pharmaceutical, and food processingequipment. The sheet 0.044" thick in the heat-treatedcondition at 2050 °F,rapid quenched, has an averageolsen cup depth of 0.48".C-276 can be successfullyfabricated by many methods. The alloy tends to workarden but with the proper care, the alloy is readily hotand cold formed. Digesters and bleach plants in the paper industry. Components exposed to sour gas.Equipment for flue-gas desulphurisation plants. Evaporators, heat exchangers, filters and mixers used in sulphuric acid enyironments. Sulphuric acid reactors. Organic chloride process equipment. Equipment for processes utilising halide or acid catalysts.

Machining:
Nickel based alloys can be difficult tomachinine.However, it should be emphasized that thesealloys can be machined using conventional productionmethods at satisfactory rates. These alloys harden rapidlygenerate high heat during cutting, weld to the cuttingtool surface and offer high resistance to metal removabecause of their high shear strengths. The following arekey points which should be considered during machining operations: capacity/tools/positive cut/lubrication.

Recommended Tool Types & Machining Conditions:

Operations Carbide Tools
Roughing, with severeinterruption Turning or Facing C-2 andC-3 grade: Negative rakesquare insert, 45° SCEA1,1/32 in. nose radius. Tooholder: 5° neg. back rake5° neg. side rake. Speed:30-50 sfm,0.004-0.008 in.feed, 0.150 in depth of cut.Dry2, oil3, or water-base coolant 4.
Normal roughing Turning or Facing C-2 orC-3 grade: Negative ratesquare insert, 45° SCEA,1/32 in nose radius. Tooholder: 5° neg. back rake5° neg. side rake. Speed:90 sfm depending on rigidity of set up, 0.010 infeed, 0.150 in. depth ofcut. Dry, oil, or water-base coolant.
Finishing Turning or Facing C-2 0rC-3 grade: Positive rakesquare insert, if possible45° SCEA, 1/32 in.noseradius. Tool holder: 5° pos.back rake, 5° pos. siderake.Speed: 95-110 sfm0.005-0.007 in. feed,0.040 in. depth of cut. Dryor water-base coolant.
Rough Boring C-2 or C-3 grade: lf inserttype boring bar, use standard positive raketools with largest possibleSCEA and 1/16 in. nose radius. lf brazed tool bargrind 0° back rake, 10° posside rake, 1/32 in. nose radius and largest possible SCEA.Speed: 70 sfm depending on the rigidityof setup, 0.005-0.008 infeed, 1/8 in. depth of cut.Dry, oil or water-base coolant.
Finish Boring C-2 or C-3 grade: Usestandard positive raketools on insert type bars.Grind brazed tools as fofinish turning and facingexcept back rake may bebest at 0°. Speed: 95-110sfm,0.002-0.004 in feed.Water-base coolant.

Chemical Composition:

Element Ni Mo Cr Fe W Co Mn C V P S Si
Minimum(%) - 15 14.5 4 3 - - - - - - -
Max(%) Bal. 17 16.5 7 4.5 2.5 1 0.01 0.35 0.04 0.03 0.08

Processing Flow Chart:

8.89g/cm3 Nickel Based Welding Wire Hastelloy C276 Wire UNS N10276 For Heating Resistor

8.89g/cm3 Nickel Based Welding Wire Hastelloy C276 Wire UNS N10276 For Heating Resistor

Send your message to this supplier
Send Now

8.89g/cm3 Nickel Based Welding Wire Hastelloy C276 Wire UNS N10276 For Heating Resistor

Ask Latest Price
Brand Name :
DINGSCO
Model Number :
According to customers requirements
Certification :
ISO 9001:2015,PED 2014/68/EU,API 6A,API-20B,TSG,NORSOK
Place of Origin :
China
MOQ :
Negotiable
Price :
Negotiable
Contact Supplier
8.89g/cm3 Nickel Based Welding Wire Hastelloy C276 Wire UNS N10276 For Heating Resistor
8.89g/cm3 Nickel Based Welding Wire Hastelloy C276 Wire UNS N10276 For Heating Resistor

Hunan Dinghan New Material Technology Co., LTD

Verified Supplier
2 Years
hunan, changsha
Since 1998
Business Type :
Manufacturer, Exporter, Seller
Total Annual :
70 million-100 million
Employee Number :
50~60
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement