Vacoflux27 High Saturation Induction Soft Magnetic Alloy Cold Rolled Strip

A-ONE ALLOY supplies Vacoflux27 to customers from worldwide.

Vacoflux27 (UNS K92650) is named 1J27 in China. It is a new type of soft magnetic alloy in China even it is already widely introduced by the inventor Carpenter. A-one Alloy is among the several manufacturers who are able to produce Vacoflux27 products in forms of cold rolled strip and round bar.

Vacoflux27 is a better choice when the fabrication is considered when HiperCo50 is somehow has better permeability and coercive force-even the difference is not big. The magnetic saturation of both alloys is nearly identical. And, Vacoflux27 does not exhibit the brittleness of Hiperco50.

Chemical Requirements(Weight Percent)

Characters

• High magnetic saturation
• Good mechanical toughness
• Good ductility
• High saturation induction
• High curie temperature: 925 °C

Applications

Motors, generators, pole pieces, relays and magnetic bearing.

Size range

Thickness: 0.05~2.0mm

Width: 10~240mm

Standards

ASTM A801 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

Heat treatment

Vacoflux 27is typically heat treated between 845 and 865°C for the best magnetic performance. It may also be heat treated at temperatures as high as 975°C without the same cautions concerning Vacoflux50. For both alloys, the use of a relatively low heat treatment temperature or reduced heat treatment time provides higher strength but with a sacrifice in magnetic performance. The higher heat treatment temperatures, within the limits stated, generally provide the best magnetic performance but lower mechanical strength.

Cool in the same atmosphere at a rate of 100 to 200°C/h to 500°C or lower and at any rate thereafter to a
temperature of at least 200°C or lower.