4 '6' Internal And External Wire Flexible Elbow Gas Pipe Water Heater Copper Fittings 90 'Flexible Elbow Water Pipe

Seamless elbow: Elbow is a pipe fitting used at bends in pipes.In the pipeline system used in all pipe fittings, accounted for the largest proportion of about 80%.Usually, different forming processes are selected for elbows of different materials or wall thickness.At present, manufacturers commonly used seamless elbow forming process has hot push, stamping, extrusion and so on.A. Hot push forming hot push elbow forming process is the use of special elbow push machine, core die and heating device, so that the billet set on the mold under the push machine to move forward, in the movement of heating, expanding and bending forming process.Hot push bend deformation characteristics are based on volume before and after plastic deformation rule of metal materials determine the pipe diameter, pipe diameter bend diameter, through the core module and control the deformation of the process, make the inner arc compressed metal flow, the compensation to other parts of the thinned by hole diameter, wall thickness uniform Angle is obtained.Hot push elbow forming process has the characteristics of beautiful appearance, uniform wall thickness and continuous operation, suitable for mass production, so it has become the main forming method of carbon steel, alloy steel elbow, and also used in the forming of some specifications of stainless steel elbow.The heating method of forming process has medium frequency or high frequency induction heating (heating ring can be multiple or single ring), flame heating and reflector heating, which heating method depends on the requirements of forming products and energy conditions.