Hyno Energy. Brand New Original China Factory HEV Battery Replacement Lexus RX450H (2010-).

In the automotive world, a hybrid is a vehicle that has two different power sources available. Sometimes one source at a time powers a vehicle...sometimes it is a mix of the two. Usually, the goal in creating a hybrid is to gain some advantage that neither of the two power sources could offer alone.

GUARANTEE

Product fabrication and material defects are guaranteed within 2 years.

Recommendations: the company's products have been filled 30-90% power in the factory, depending on the shipping distance and packing conditions. When capacity measurement, discharge with 1C to 12.6V/ stick; then charge/discharge with the specified current to test capacity. If the stock reach or exceed 2 months, discharge with 1C to 14.4V/ stick; Then charge with 1C for 54min, 0.2C charge for 1hrs, rest 20min, discharge with 1C to 12.6V/ stick, after 3 cycles; Then charge/discharge with the specified current to test capacity.

For the first use, the standard charge method is recommended to avoid damage to the battery.

SCOPE

This specification is applicable to Ni MH battery for hybrid produced by Hunan Hi-soon Supply Chain Co., Ltd.,

Model: Hyno RX450H 288

Suitable for: Lexus RX450H (2010-).

RATINGS

PERFORMANCE module only

Tests should be done within one month of receiving the goods under the following conditions.

Test condition

Temperature:20±5℃

Relative Humidity:65±20%

Atmospheric Pressure:86～106kPa

Standard charge discharge specification

Discharge: 6000mA (1C) to 168.0V

Charge: 6000mA (1C)×1hrs,1200mA (0.2C)×1hrs

Discharge: 6000mA (1C) to 12.0V

CAUTION

When charging the battery, please charge in accordance with the charging method in the product specification. Use the specified charger in the specified temperature range. Do not reverse charge, do not exceed the required charging current, and do not exceed the required charging time. Do not charge only with limited voltage and limited current

1. Do not put the battery into the fire or heating it
2. Do not connect the positive and negative pole with conductive substances such as metals.
3. Do not dissect the battery.
4. Do not refit or damage batteries.
5. Do not solder battery.
6. Do not contacting the battery with water, sea water, or other oxidants.
7. Do not hit, puncture or shock battery.
8. Do not use batteries inconsistent with the equipment.
9. The inside strong alkali with high corrosiveness may burn people. If alkali is hitting eyes, skin or clothing, please drastically clean it with tap water or other clean water and get medical treatment straight away.
10. If the battery does not work properly in the equipment, please refer to the equipment warning and use manual.