Applicable Foods:
1. Beer, wine, fruit wine and edible oil should be used before pressure tanks and blown bottles are capped, which can remove oxygen and prevent non-carbonated beverages and edible oil from being oxidized, decayed or faded. If bottle corks are used, wooden plugs in bottles can be prevented from being mildewed, and nitrogen purity is ≥99%.
2. Puffed and fried foods: the foods can be prevented from being softened or deteriorated due to a small amount of water, and are well packaged and difficult to break during transportation.
3. Pastries, baked foods and egg pies: preservation time can be generally prolonged by 3-5 months. The foods can be prevented from being deformed or broken during transportation after nitrogen charging.
4. Milk powder and soybean milk powder: the phenomenon that the milk powder is agglomerated when extruded and stored for a long time can be prevented or reduced by using trace nitrogen.
5. Grains, nuts, fruits and vegetables: the harm of organisms such as pests can be prevented by charging nitrogen with the purity of 95%, 5% of oxygen can reduce the respiratory rate of the fruits, and the preservation effect is very obvious.
6. Candies and snack foods: they are mainly suitable to be packaged by airtight bags.
Technical features:
Only equipped with oil free or micro oil air compressor (see product is equipped with complete sets of equipment), nitrogen making mechanical and electrical source can boot the production of nitrogen, nitrogen purity can be adjusted by adjusting the nitrogen flow rate, the adjusting range is 95% ~ 99.99%.
2. A full set of automation equipment, and energy saving control, equipped with the inverter circuit to ensure a complete set of nitrogen making device in the economic operation and energy saving condition.
3. Nitrogen measurement instrument online continuous detection, real-time monitoring of nitrogen purity. The machine has compact structure, small size, easy to clean.
4. The unit adopts the optimization design, durable, investment recovery fast.
The main technical parameter list:
specifications | Nitrogen production Nm3/h | power (kW) | purity (%) | Air pressure Mpa | Producing nitrogen pressure Mpa | Overall dimensions mm |
TY-3 | 3 | 0.5 | 99.5-99.99 | 0.8-1.0 | 0.1-0.65 | 570*570*950 |
Note: for a pillow packaging machine inflatable, form a complete set of the displacement of air machine:≥0.4m³/min,≤The oil content:3ppm |
TY-5 | 5 | 0.5 | 99.5-99.99 | 0.8-1.0 | 0.1-0.65 | 570*570*1200 |
Note:for two inflatable pillow packaging machine,form a complete set of air compressor exhaust:≥0.6m³/min,≤The oil content:3ppm |
TY-10 | 10 | 1 | 99.5-99.99 | 0.8-1.0 | 0.1-0.65 | 1350*1200*1650 |
Note:for four pillow packaging machine or two vertical packaging machine inflatable,form a complete set of air compressor exhaust:≥0.9m³/min,≤The oil content:3ppm |
TY-15 | 15 | 1 | 99.5-99.99 | 0.8-1.0 | 0.1-0.65 | 1350*1200*1650 |
Note:for five pillow packaging machine or three vertical packaging machine inflatable,form a complete set of air compressor exhaust:≥1.25m³/min,≤The oil content:3ppm |
TY-20 | 20 | 2 | 99.5-99.99 | 0.8-1.0 | 0.1-0.65 | 1400*1200*1800 |
Note:for seven pillow packaging machine or five vertical packaging machine inflatable,form a complete set of air compressor exhaust:≥1.5m³/min,≤The oil content:3ppm |
TY-30 | 30 | 2 | 99.5-99.99 | 0.8-1.0 | 0.1-0.65 | 1400*1200*1800 |
Note:for ten pillow packaging machine or seven vertical packaging machine inflatable,form a complete set of air compressor exhaust:≥2m³/min, ≤The oil content:3ppm |
TY-40 TY-50 TY-60 TY-70 TY-80 TY-100 TY-200 |
