SMS 2400 PP Spunbond and Meltblown Nonwoven Machine

Main Technical Parameters

PROCESSING EQUIPMENT

WITH COMPLETE PROCESSING EQUIPMENT AND PERFECT DETECTING MEANS AS WELL AS COMPREHENSIVE COMPUTERIZED INFORMATIONIZED MANAGING SYSTEM, EACH STAFF DEMONSTRATES A HIGH SENSE OF RESPONSIBILITY AT EACH STAGE OF PRODUCTION, WHICH SHOWS HIGH RESPONSIBILITY TO THE QUALITY OF PRODUCTS, THE PROMISE OF COMPANY AND THE REQUIREMENTS OF CUSTOMERS.

FILTER

IT IS USED TO REMOVE THE IMPURITIES ANG GEL PARTICLES IN THE MELT, WHICH IMPROVES THE SPINNING PERFORMANCE, ENSURES THE SPINNING QUALITY AND PROLONGS THE LIFE OF SPINNING COMPONENTS. IT ALSO PLAYS AN IMPORTANT ROLE IN IMPROVING THE EQUIPMENT UTILITY AND THE OUTPUT.

MELTING & MIXING SYSTEM OF EXTRUDER

THE COLOR MATCHING SYSTEM WORKS AS AN AUXILIARY EQUIPMENT FOR THE PRODUCTION LINE. THE MOTOR FOR COLOR MASTERBATCH REGULATED BY THE INVERTER WOKRS WITH THE EXTRUDER SYNCHRONOUSLY.

ACCORDING TO THE PRODUCTION TECHNOLOGY, THE FIXED QUANTITY OF ADDITIONAL RAW MATERIALS OR COLOR MATERBATCH CAN BE ADDED INTO THE PP MATERIALS. THEY WILL BE EVENLY BLENDED, WHICH ENSURES THE UNCHANGED MELT VISCOSITY AND COLOR AND NO CHANGE IN THE COLOR DIFFERNCE OR PRODUCT QUALITY.

HEAT CONDUCTION OIL HEATING SYSTEM

THE SCREW HEAD IS HEATED BY HEAT CONDUCTION OIL HEATING SYTEM.

THE FILTER IS HEATED CIRCULARLY BY HEAT CONDUCTION OIL, WHICH ENSURES HEAT PRESERVATION.

THE MEASURE PUMP IS HEATED CIRCULARLY BY HEAT CONDUCTION OIL, WHICH ENSURES HEAT PRESERVATION.

THE SPINNING BODY IS HEATED CIRCULARLY BY HEAT CONDUCTION OIL, WHICH ENSURES HEAT PRESERVATION.

THE PRE-ROLLER IS HEATED CIRCULARLY BY HEAT CONDUCTION OIL, WHICH ENSURES HEAT PRESERVATION.

COOLING & STRETCHING EQUIPMENT & ACCESSORIES

AIR CONDITIONER, BLOWER & VENTILATION PIPELINE

STRETCHER

THE ENTIRE WIDE SLOT STRETCHING IS ADOPTED.

WITH HIGH STRETCHING EFFICIENCY AND LOW CONSUMPTION;

WITH EVEN STRETCHING FIBRE AND LITTLE DIFFERENCE ON MONOFILAMENT;

WITH LONG-DISTANCE AND FULLY STRETCHING;

WITH FINE FIBRE SLITTING EFFECT AND EVEN NET DISTRIBUTION;

WITH ALL-CLOSED SYSTEM, CONVENIENT TO CONTROL.

HOT ROLLING MILL & WINDER

CHARACTERISTICS OF HOT ROLLING MILL:

EVEN TEMPERATURE WITH THE TOLERANCE ≤2°C.

EVEN PRESSURE AND FLAT FABRIC. SENIOR CROSS INTERMEDIATE COMPENSATION IS ADOPTED FOR PRESSURE COMPENSATION.

WITH STABLE SPEED AT 10-150M/MIN.

WITH EASY OPERATION AND MAINTENANCE.

CHARACTERISTICS OF REWINDER:

WITH ONLINE SLITTING AND AUTOMATIC ROLL CHANGING, IT CAN REACH UP TO 150M/MIN.

WITH EVEN TENSION AND FINE WINDING, THE MAXIMUM DIAMETER CAN ACHIEVE 1500MM.

WITH SYNCHRO AND PRECISE METER COUNTING, IT CAN COUNT UP TO 9999000MM.

IT CAN RUN INDIVIDUALLY.

AUXILIARY EQUIPMENT

VACUUM CALCINER

IT IS A VACUUM HEAT TREATMENT DEVICE. THE ELECTRICITY IS USED AS ITS ENERGY. COMPARED WITH THE TRADITIONAL CALCINATION, IT CAN REDUCE EMISSIONS AND OXIDATION DEGREE OF CALCINER, WHICH CAN IMPROVE THE LIFE OF CALCINER TO A PERFECT EFFECT.

ELECTRICAL CONTROL SYSTEM

THE ADVANCED ELECTRIC DEVICES FROM ABROAD ARE ADOPTED SO AS TO MEET the characteristics of our spunbonded fabric technology.

SPINNING SYSTEM

SPINNING BODY & COMPONENTS

THE MELT FED BY THE MEASURE PUMP CAN BE DISTRIBUTED EVENLY INTO THE SPINNING COMPONENTS UNDER CERTAIN PRESSURE AND THE SPINNING BODY will take the last step for heating and preservation.

THE SPINNING BODY IS HEATED CIRCULARLY BY HEAT CONDUCTION OIL, WHICH ENSURES HEAT PRESERVATION.

the components consist of filter screen, distribution panel and seal etc.

the assembly of spitting board refers to the regulation of components.

VACUUM POWER FEEDER

WITH THE STAINLESS STEEL COMPOUNDED STRUCTURE, IT ADOPTS VACUUM FEEDING. THANKS TO THE IMPULSE BLOWBACK DEVICE INSIDE, THE HIGH separation rate of materials can be achieved. it can automatically feed various materials with high automation, small volume, large feeding amount, easy operation and convenient transportation.