Full Automatic High Quality Single Beam PP Spunbond Nonwoven Machine With Lowest Price
Main Technical Parameters
Model No. | WX-S-1.6 | WX-S-2.4 | WX-S-3.2 |
S(Product width) | 1600mm | 2400mm | 3200mm |
Equipment Size | 15*8.6*9.5m | 15*9*9.5m | 15*10*9.5m |
Speed | 150m/min | 150m/min | 150m/min |
Gram Weight | 10-180g/m2 | 10-180g/m2 | 10-180g/m2 |
Yield (according to 70g/m2) | 4T/Days | 7-8T/Days | 9-10T/ Day |
Production Application
Product Details
Dosing device
To feed chips from the ground to the dosing and mixing system on the third floor.
Main material and auxiliary materials can be prepared as per a certain ratio.
Dosing and mixing device, consisting of a main material tank, two auxiliary tanks,
a mixing tank, a suction device
Adding ratio for Additive I: 0.5—5%
Adding ratio for Additive II: 0.5—5%
Adding ratio for Additive III: 5—50% (Filling)
Max. capacity for main material: 500kg/hr
Main extruder --JWELL BRAND
Used to melt and extrude PP chips mixed with master batches and additives such as antioxidant, anti-pilling agent and flame retardant agent, including chip inlet, automatic temperature controls, cooling system and alarm system.
Main drive employs A.C. frequency control. The temperature control for each zone adopts closed-loop system with WEST temperature meter, solid relay and pt100 platinum resistance.
Edge recycle extruder
Used for recovery of edges, including A.C. regulating motor for recovery screw and complete temperature control system composed by temperature meter for each heating zone, solid relay and Pt100 platinum resistance.
Spinning machine
he spinning machine consists of melt manifold, filter, metering pump and its drive, spin beam, monomer suction and spin pack. It has automatic heating and insulating system, pressure indication and control system behind filter screen and one static mixer in the melt manifold.