EVA 30 3mm Thick High Density Foam Underlayment With Moisture Barrier

3mm Thick High Density Rubber Foam Underlayment With Moisture Barrier

Description

3mm Thick High-Density Rubber Foam Underlayment With Moisture Barrieris an easy to install foam underlay that provides excellent shock absorption and is water-resistant. Each roll of this foam underlayment features a PE vapor barrier and self-adhering strips, making installation a breeze. This underlay is great under all flooring types but is very popular under floating floors such as laminate and engineered wood flooring. EVA underlayment is backed by a 25-year warranty and is approved over radiant heat.

Specification

Description:
Square Feet per Roll: 200 sq.ft
Roll Size: 16.9*1.1m
Flooring Applications: floating, glue-down, nail-down
Flooring Type: Hardwood, Laminate, Vinyl

• Helps eliminate minor subfloor imperfections
• Helps reduce floor noise by providing excellent sound absorption
• Adds a thermal value
• Can be used with radiant heat flooring
• Made with 100% post consumer recycled granulated rubber tires and polyurethane foam.

Installation Instrctions

1. Before rolling out the underlayment, be sure to sweep, vacuum, and remove all debris on the substructure.
2. Fill in any significant holes, gaps or breaks that may exist on the substructure.
3. Roll out the Underlayment over the substructure surface.
4. Splice each roll of underlayment with a 3 mil tape, duct tape, or similar pressure-sensitive tape that meets/exceeds the water vapor transmission ratings suggested by the flooring manufacturer.
5. If installing MoistureBlock Film Underlayment with Self-Sealing film edge, simply connect the rolls by removing the liner from the tape and adhere to the edge of the previous roll.
6. Always be sure to connect the film rolls together with the adhesive tape evenly so that there are no gaps between the adjoining rolls of film.
7.