NOVATEK NT99141 MIPI Camera Module 720P HD Auto White Balance
Customizable Size Low Cost 720P HD MIPI Camera Module With NT99141 Sensor From NOVATEK
MIPI Camera Module
This is a low-cost 720P MIPI camera module with NT99141 sensor from Novatek, The NT99141 is such a high performance image sensor that by incorporating a 1284H x 724V image array, an on-chip 10 bits ADC, and embedded image signal processor all the required image signal processing functions -including sharpness, noise reduction, defect correction, gamma, and color saturation adjust-are in default supported, while its easy controllability and usability are maintained by the two-wire serial interface bus.It is suitable for use in products such as cellular phones and PC cameras.
Specification
Module No | SNS-NT99141-M1 |
Pixel Size | 3.0μm x 3.0μm |
Effective Pixels | 1280H×720H |
Video output | Raw Bayer10bit/8bit |
Active Array Size Video Rate | 1280x720@30FPS;640x360@60FPS |
Image Sensor | 1/4" |
Sensor Type | Novatek NT99141 |
Lens view | FOV65°(optional),F/N(optional) |
TV Distortion | <1% |
AEC | Support |
AEB | Support |
AGC | Support |
Operating voltage | AVDD:3.0~3.6V DOVDD:1.7~3.6V DVDD:1.7~1.9V |
Operating temperature | 0~60℃ |
Storage temperature | -20~70℃ |
Dimensions | Customizable |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application scenarios, resolution, size, and lens requirements. We will have a professional team of engineers to assist you in choosing the most suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to confirm the details with you. Once the drawing is confirmed, we will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we will send the samples to you via DHL FedEx UPS or any other courier methods, usually within a week.