2MP Electronic Rolling Shutter Analog Camera Module MIPI Customizable Dimensions
Customizable Dimensions Fixed Focus 2MP Electronic Rolling Shutter MIPI Camera Module
Camera Module MIPI
This is a 2MP MIPI camera module with GC2145 CMOS sensor from GalaxyCore,the GC2145 is a high quality 2Mega CMOS image sensor, for mobile phone camera applications and digital camera products. GC2145 incorporates a 1616V x 1232H active pixel array, on-chip 10- bit ADC, and image signal processor.
According to different light conditions, The on-chip ISP provides a very smooth AE (Auto Exposure) and accurate AWB (Auto White Balance) control .Besides, interpolation, de-noise, and color correction, gamma correction are supported, which can revert the real scene better.
The sensor also provides various data formats, such as Bayer RGB, RGB565, YCbCr 4:2:2. All sensor parameters and features are controlled through a standard 2-wire serial interface. Internal master clock can be generated by on-chip Phase Lock Loop(PLL) oscillator.
Specification
Module No | SNS-28935-V1.1 |
Pixel Size | 1.75μm x 1.75μm |
Effective Pixels | 1600(H)X1200(V) |
Video output | YUV2 MJPG |
Active Array Size Video Rate | 1600x1200 @15fps 1280x720 @ 15fps 640x480 @ 30 fps 320x240 @30fps |
Image Sensor | 1/5" GC2145 |
SNR max | TBDdB |
Dynamic range | TBDdB |
OTG | USB2.0 OTG |
Drive free | USB Video Class(UVC) |
AEC | Support |
AEB | Support |
AGC | Support |
Lens view | FOV90°(optional),F/N(optional) |
Interface | USB BUS POWER 5P-1.0mm |
Operating temperature | 0~60℃ |
Storage temperature | -20~70℃ |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application scenarios, resolution, size, and lens requirements. We will have a professional team of engineers to assist you in choosing the most suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to confirm the details with you. Once the drawing is confirmed, we will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we will send the samples to you via DHL FedEx UPS or any other courier methods, usually within a week.