Durable Horizontal Centrifugal Pump / Self Priming Centrifugal Pump

Assembly and Disassembly

Ensure no parts are missing or defective before assembly, wipe every part clean then start.

1). Tighten the bolts, screws and other fasteners to each relevant assembly parts.

2) .Lay O rings, gaskets, felted wool or other sub-seals in each relevant assembly parts.

3) .Place wearing ring and gaskets into casing cover.

4) .Mount ball bearings to shaft, and joint shaft and bearing housing together, close bearing cover with bolts then put slinger onto shaft.

5). Depress stationary seal ring into mechanical seal cover, put seal cover,mechanical seal,shaft sleeve one by one onto shaft.

6). Fasten casing cover onto bearing housing by fastening bolts, place key into shaft, set impeller on key, put lock washer and impeller nut onto shaft against impeller and tighten them.

7). Fix all the assembly parts where mentioned above into volute casing, tighten all the bolts and screws for volute casing, casing cover and mechanical seal.

Company Service:

We sincerely offer various fittings for import and domestic separator users. Our professional personnel will give you help and consultation at any time.

Repair and Maintenance:

We sincerely offer various fittings for import and domestic separator users. Our professional personnel will give you help and consultation at any time.

Train:

Juneng Company provides parts and repair, maintenance as well as techical advice for the demestic and import separator in long time. We guarantee the quality of every maintenance and service.

Horizontal Centrifugal Pump Application:

It is applied to convey liquid from all kinds of light or volatility to deep sticky, even to half-solid. It is widely used in petroleum, chemistry, oil, paint etc.

Product competitive advantage:

The inner gearing principle is adopted for this pump. The annular and external gear pitch circles closely lean against one side, the other side is separated by covering with “ crescent plate” . The annular gear driver the external gear for the same direction rotation. It has the advanced structure, fine quality, small volume, large flow, low noise, durable service life.

Product Specifications: