Coalescence Separation Filter Parts , Oil And Water Separation Filter Core​

Product Description:

The oil and water separation filter core is mainly designed for the separation of oil and water. It contains two kinds of filter elements, namely: the filter element and the separation filter element. For example, in the oil removal system, the oil flow into the coalescence separator, first flows through the coalescence filter core, the coalescence filter core filter solid impurities, and the small water droplets coalesced into larger water beads. Most of the water droplets after coalescence can be separated and removed from oil by gravity and sink into the sink.

The oil products then flow through the separation filter core, because the separation filter core has good hydrophobicity and hydrophobicity, thus further separating water, and finally, clean, unwater oil flow out of the coalescence separator. The oil first enters the lower part of the shell of the filter, then flows through the filter core from the outside, then the coarser particles will be precipitated immediately, released by the discharge valve, and the smaller particles are intercepted by the filter core. After the final clean oil is collected through the filter core tray, the coalescence separator is discharged from the outlet pipe. With the increase of the amount of processed oil, the pollutants deposited on the filter core will cause the increase of the pressure difference of the coalescer. When the pressure difference rises to 0.15Mpa, it indicates that the coalescence filter core has been blocked and should be replaced. Oil from the coalescer inlet into the first stage tray, and then diverted into the first stage of the filter core, through the filtration, demulsification, water molecules grow up and coalescing, the impurities are intercepted in the first order filter core, the coalescing water drops into the sedimentation tank, and the oil products enter the two stage filter core from the outside, and gather in the two stage pallet, from the accumulation. The exit of the junction separator outlet. The material of the two stage filter core has a hydrophobicity, the oil can pass smoothly, and the free water is blocked out of the filter core, flowing into the sedimentation tank and discharging through the discharge valve.

Features:

● Excellent performance of chemical compatibility.

● High flow rate, low pressure drop, long work life.

● Better performance removal rating meets all-purpose application.

● Hot melting seal enhances the strength and reduce the dissolved matter.

● Pleated design provides high dirt holding and suspended solids capture.

Technical parameters:

Working Condition: