High Performance Portable Oil Purifier Machine Micro Filtration Systems

Application:

DK series industrial oil filtration system is the ideal way to pre-filter and transfer fluids into reservoirs or to clean up existing systems. Fluid should always be filtered before being put into use.

Solid particle pollution leads to the failure of hydraulic system and lubricating system, so it is necessary to filter the industrial oil before pour it into system. New fluid is not necessarily clean fluid. Most new fluids (right out of the drum) are unfit for use due to high initial contamination levels. Contamination, both particulate and water, may be added to a new fluid during processing, mixing, handling and storage.

DK Series Portable oil purifier is widely applied in filtration of various industrial oil, such as insulating oil, transformer oil, lubricating oil, hydraulic oil, turbine oil, mechanical oil, compressor oil, cooking oil, fuel oil etc. It mainly remove mechanical impurities and powder particles. DK can do precision filtration and generally equips three-stage filters, also can equip four or five stage filters as requirements. The machine is small size, light weight, stable performance, environmental protection, energy-saving and easy to replace filters. it can be used as oiling machine for long distance and high-lift oiling works, particularly suitable for use in the Field.

Filtration & Separation Solutions for: Solid Particulate and water removal

Suitable for: Hydraulic oil, engine oil, gear oil (Petroleum or mineral base oil) and lubricating oil

Function: Its design makes it ideally suited to removing reliably in a single-pass 98% of contamination and free & emulsified water to less than 10 ppm, thereby guaranteeing the required cleanliness.

DK series machine suitable for:

1. Filtering new fluid before putting into service

2. Transferring fluid from drums or storage tanks to system reservoirs

3. Conditioning fluid that is already in use

4. Complimenting existing system filtration

5. Removing free water from a system

6. For use with fluids such as hydraulic oil, gear oil, lube oil,transformer oil,insulating oil etc.

Usage:
This oil purifier is fit for oil-using departments and corollary equipments. It can be used in the filtration of mechanical impurity, high-lift and long-distance oil pumping and injection.

Characteristics:
This type of machine filters by three steps whose filtering elements gradually become intensive.It doesnt need filter paper with several advantages such as:portable,easy-handling and environment protecion .etc. It can not only filter the impurities in oil ,but also satisfy the high-lift and long-distance oil pumping and injection.

Technical specification: