Smart Gigabit Ethernet 10 / 100 / 1000Base -T to 1000Base - SX / LX Converter with One SFP Slot
Product Description
MCG-SFP series is a Ethernet media converter that converts media transmission between TP copper cablings an fiber SFP(Small Form-Factor Pluggable) Transceivers. The MCG-SFP copper-to-fiber module is available in 10/100/1000Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and 1000M fiber networks.
The MCG-SFP-L with DIP switch for smart settings of LFP for network diagnosis and transmission mode.
Features
Conversion between different transmission speeds and media types
Standalone and compact hardware design
Auto-negotiating Ethernet port (Speed and Half/Full Duplex)
Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
Standard open Fiber slots for SFP Transceiver
The transmission of extra-long packes over VLAN
9K Jumbo Frame size supported
Easy-to-view LED indicators provides status to easily monitor network activity
Voltage supervisor
14-Slot Rack compliance
RoHS Compliant
LFP function(Link fault pass through)
With DIP switch to set LFP enable or disenable, to set Cut-through mode or store-and-forward mode
Technical Specifications:
Parameter | Specifications |
Access mode | 10/100/1000Mbps Gigabit Ethernet |
Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
Wavelength | 850nm/1310nm/1550nm or CWDM wavelength |
Port |
One RJ45 connector, connected to STP/UTP category-5 twisted pair One SFP Port, connected to MM or SM fiber |
Conversion mode | Medium conversion, storing and forwarding |
MAC address table | I K |
Buffer space | 1Mbit |
Flow control | Full duplex state: flow control; half duplex state: back pressure mode |
Delay | 9.6us |
Bit error rate | <1/1000000000 |
MTBF | 100,000 hours |
LED | POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action) |
Power |
Input: AC220 1A/ DC-48 Output: 5V 1A |
Power consumption(Max) | ≤5W |
Operating temperature | -10~55℃ |
Operating humidity | 5%~90% |
Storage temperature | -40~70℃ |
Storage humidity | 5%~90% (non-condensing) |
Dimensions | 26mm(H)*70mm(W)*94mm(D) (height * width * depth) |
DIP switch(LFP Function)
SW1 |
ON | LFP enable |
OFF | LFP disable | |
SW2 | ON | Cut-through mode |
OFF | Store-and-forward mode |