12core GYXTW Fiber Optic Cable 4 Core Single Mode Self Supporting Aerial
Product Description
The fibers,125μm,are positioned in a loose tube made of a high modulus plastic.The tubes are filled with a waterresistant filling compound.The tube is wrapped with a layer of PSP longitudinally.Between the PSP and the loose tube waterblocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape.The cable is completed with a polyethylene (PE) sheath.
Product Description
Single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. Then the cable is completed with a PE sheath. Which is filled with the filling compound to protect it. After PSP is applied over the inner sheath, the cable is completed with a PE outer sheath.
No. | Items | unit | Specification | |
10G-300 | ||||
1 | Core Diameter | μm | 50.0±2.0 | |
2 | Cladding Diameter | μm | 124.8±1.0 | |
3 | Core Non-Circularity | % | ≤5.0 | |
4 | Cladding Non-Circularity | % | ≤1.0 | |
5 | Core-Cladding Concentricity Error | μm | ≤1.0 | |
6 | Coating Diameter | μm | 245±7 | |
7 | Coating Non-Circularity | % | ≤6.0 | |
8 | Cladding-Coating Concentricity Error | μm | ≤12.0 | |
9 | OFL Bandwidth | 850nm | MHz·km | ≥1500 |
1300nm | MHz·km | ≥500 | ||
10 | Attenuation Coefficient | 850nm | dB/km | ≤3.0 |
1300nm | dB/km | ≤1.0 |
Items | Specifications | |
Fiber Count | 12 | |
Colored Coating Fiber | Dimension | 250µm±15µm |
Color | Blue,Orange,Green,Brown,Gray,White,Red,Black,Yellow,Purple, Pink,Aqua | |
Loose Tube | Dimension | 2.5mm±0.05mm |
Material | PBT | |
Color | Natural | |
Strength Member | Diameter | 1.0mm |
Material | Steel Wire | |
PSP | Diameter | 4.1 mm±0.1mm |
Thickness | 0.45mm | |
Outer Jacket | Dimension | 9.0mm±0.3mm |
Material | HDPE | |
Color | Black |
Items | Unite | Specifications |
Tension(Long Term) | N | 1000 |
Tension(Short Term) | N | 2000 |
Crush(Long Term) | N/10cm | 1000 |
Crush(Short Term) | N/10cm | 3000 |
Min. Bend Radius(Dynamic) | mm | 20D |
Min. Bend Radius(Static) | mm | 10D |
Installation Temperature | ℃ | -20~+60 |
Operating Temperature | ℃ | -40~+70 |
Storage Temperature | ℃ | -40~+70 |
Characterisics
1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
2. Critical protection to fibers.
3. Excellent crush resistance and flexibility.
4. The following measures are taken to ensure the water blocking performance of the cable:
- Single steel wire used as the central strength member
- Special water-blocking filling compound in the loose tube.
PSP moisture barrier
- 100% cable core filling and water-blocking material
Service
1. 24hours one-to-one online services ensure efficient support.
2. Excellent care from order confirmation to product shipment.