Qsfp28 Ir4 Psm4 Ethernet Optical Transceiver 2km on SM fiber Distance
Overview
This product 100G QSFP28 PSM4 2KM provides increased port density and total system cost savings.An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector.
Features
Parameter
Package | QSFP28-100G-PSM-IR4 |
Data Rate (typical) | 25.78 Gbps PER CH |
Centre Wavelength | 1310nm |
Distance | Up to 2km reach for G.652 SMF |
Diagnostics | Digital Monitor |
Transmitter | 4CH CWDM DFB |
Receiver | 4CH PIN |
TX Output Power | -5.5~+2dbm |
RX Sensitivity | -12dbm |
Low/High Case Temperature | 0°C~70°C |
Voltage Supply (typical) | 3.3v |
Connector | MPO / MTP Female SMF |
Application
Ordering Information
Part Number | Product Description |
QSFP28-100G-PSM4 | QSFP28 IR4 PSM4 2km on SMF optical transceiver |
Attention: To minimize MPO connection induced reflections, an MPO receptacle with 8-degree angled end-face is utilized for this product. A female MPO connector with 8-degree end-face should be used with this product as illustrated in Figure
Competitive advantage
1. OEM/ODM Customized label
2. Competitive pricing
3. Full compatible (HP/Extreme/Juniper/H3C…)
4. Excellent quality and 3 years warranty
5. Keep stock,Fast delivery