4 ch Video+Ethernet+RS232 To Fiber Optic support 4 ch Video+10/100M Ethernet+RS232 data over one multi-mode or single-mode optical fiber. The devices are directly compatible with NTSC, PAL, and SECAM camera systems. Especially for PTZ Cameras and support RS232 data protocol.
Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status. A typical installation utilizes a transmitter unit at the camera end of the link, connected via a single fiber optic cable, to a receiver unit at the monitoring end of the link. Devices are available for either stand alone or card-type installed in 19’’ 4U rack-mount chassis.
Features
Application
Specifications
Opitcal:
Wavelength | 1310nm&1550nm |
Output Power | -9~ -3dBm / -5~0dBm |
Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
Rx sensitivity | -25dBm |
Optical connector | FC,ST,SC (optional) |
Distance | 0~1KM (MM) / 20,40,60,80KM (SM) |
Video:
Number of Channels | 4 |
Input/output impedance | BNC 75Ω (unbalance) |
Video bandwidth | 5HZ~7.5MHZ |
Standard video input/output voltage | 1.0Vp-p |
Video voltage range | 0.6~2.0Vp-p |
Differential Gain | < ±1.5% |
Differential Phase | < ±1° |
SNR | >60dB (8 bit) |
Connector | BNC |
Data:
Data protocol | RS232 |
Data rate | 0~500 Kbps |
Error rate | < 10-9 |
Connector | Standard terminal lead |
Ethernet:
Work mode | Full duplex/half duplex |
Data Rate | 10/100Mbps(AUTO) |
connection terminal | RJ45 |
Other
Power | DC5V 2A |
Power Consumption | ≤5W |
Temperature | -30ºC ~75ºC |
Humidity | 10%~90% RH |
Unit Weight (pair) | 1.5kg |
Dimension | 175mm×154mm×30mm |
Package size | 30×22×9cm |
Installation | Wall mount |
MTBF | ≥ 100000Hours |
Case material | Aluminum |
System connection diagram
Standalone