EFP Fiber Optic for Datavideo Remote includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the Sony or Panasonic camera to the Base Station, Reverse video(SDI or CVBS),Datavideo Remote control data(Connect Datavideo MULTI-CAMERA CONTROL UNIT MCU-100 ), intercom (Camera end can be connected professional 4-pin or 5-pin XLR headset, OB end can be connected intercom main station),, tally(1 or 2 colors),reverse CVBS or Genlock. The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
Specifications:
Work Temp | -25°C to 55°C |
Storage Temp | -40°C to 85°C |
humidity | 0 ~ 95% (non-condensing) |
Camera Optic Adaptor | |
Input power | DC 11~19V |
Power consumption | <8W |
Net weight | 1kg |
Appearance size | 188mm*116mm*45mm(without V-mount / A-mount) |
Optic Base Station | |
Input power | AC90~240V |
Power consumption | <20W |
Net weight | 3kg |
Appearance size | 19” 1U standard rack mount |
Optical:
Wavelength | 1310nm / 1550nm / CWDM |
Output Power | -6~-1dBm |
Rx sensitivity | <-18dBm |
Transmission Distance | SM fiber 10+km , MM fiber 300m |
Optical connector | Dul LC /FC/ST/SC/ Lemo / Neutrik (optional) |
SDI input/output:
Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface | BNC 75 Ohm |
Intercom:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone | Mic inputs with mute and pre-amps |
Headphone | With amplifier and volume up or down |
Optic Base Station | |
Interface | 3pin XLR Female/Male: Party line audio for Clearcom or RTS Intercom main station DB9(Male): Line level audio input and output, |
Tally:
Camera Optic Adaptor | |
Interface | 4pin air head or 3pin mini XLR |
Output | Dry Contact Closure or wet LED+/- |
On: short or LED on Off: open or LED off | |
Optic Base Station | |
Interface | DB9(Male) |
Input | Dry Contact Closure or TTL |
On: short to GND or TTL low Off: open or TTL high |
Remote:
Camera Optic Adaptor | |
Interface | RJ45 Datavideo remote interface |
Data | RS422 /RS232/RS485 |
Optic Base Station | |
Interface | RJ45 Datavideo remote interface |
Data | RS422 /RS232/RS485 |
Panel diagram: