Huawei CE6865 - 48S8CQ - EI Switch 48Port 25GE SFP28 8 * 100GE QSFP28 Without Fan and Power Module
Offering high-performance, high port density, and low latency, CloudEngine 6800 series switches enable enterprises and carriers alike to build cloud-oriented data center networks. The series also features an advanced hardware design combined with either 10 GE or 25 GE access interfaces and 40 GE or 100 GE uplink interfaces, advanced data center features, high-performance stacking technologies, and flexible airflow capabilities. CloudEngine 6800 series switches are well suited for both the core and aggregation layers, and are fully compatible with CloudEngine 16800 and 12800 series switches, further enabling enterprises to build scalable, simplified, open, and secure networks.
Specification
Parameters | CloudEngine 6865-48S8CQ-EI |
Downlink Ports | 48 x 10/25 GE SFP28 |
Uplink Ports | 8 x 40/100 GE QSFP28 |
Switching Capacity | 4 Tbit/s |
Forwarding Rate | 2000 mpps |
Buffer | 32 MB |
Reliability | LACP Microsegmentation Hardware-based BFD |
O&M | Telemetry Netstream sFlow Enhanced ERSPAN |
Data Center Features | VXLAN routing and bridging BGP EVPN M-LAG DCBX, PFC, and ETS |
Maximum Power Consumption | 470 W |
Power Supply | AC: 600 W DC: 600 W |
Operating Voltage | AC: 90–290 V DC: –38.4 V to –72 V |
CE6865-48S8CQ-EI Appearance and Structure Figure 3-2 CE6865-48S8CQ-EI
1 | Power supply slot 1 | 2 | Power supply slot 2 |
Applicable power modules: | Applicable power modules: |
350 W DC Power Module (PDC-350WA) | 350 W DC Power Module (PDC-350WA) |
600 W AC Power Module (PAC-600WA) | 600 W AC Power Module (PAC-600WA) |
600 W DC Power Module (PDC600S12) | 600 W DC Power Module (PDC600S12) |
3 | Fan slot 1 | 4 | Fan slot 2 |
Applicable fan modules: | Applicable fan modules: |
FAN-40HA series fan modules | FAN-40HA series fan modules |
5 | Console port | 6 | ETH management port (RJ45) |
7 | Barcode label | 8 | USB port |
9 | Forty-eight 10GE/25GE SFP28 Ethernet optical ports | 10 | Eight 40GE/100GE QSFP28 Ethernet optical ports |
Applicable modules and cables: | NOTE: |
10GE optical module (OSXD22N00, LE2MXSC80FF0 and SFP-10G-ZDWT-L not supported) | A QSFP28 Ethernet optical port can be split into four 10GE or 25GE ports. |
GE Optical Modules (supported from V200R005C00 version) | Applicable modules and cables: |
GE copper module (supported from V200R005C00 version and only works at 1000 Mbit/s) | 40GE optical module |
25GE optical module (only supports SFP-25G-SR) | 100GE optical module (QSFP28-100G-4WDM-40 not supported) |
SFP+ AOC cable | QSFP+ to QSFP+ AOC cable |
SFP28 AOC cable | QSFP+ to 4*SFP+ AOC cable |
SFP+ high-speed cable | QSFP+ to 4*SFP+ high-speed cable |
SFP28 high-speed cable | QSFP+ to QSFP+ high-speed cable |
| QSFP28 to 4*SFP28 high-speed cable |
11 | Three port-side mounting holes for mounting brackets | 12 | Four power-supply-side mounting holes for mounting brackets |
13 | Ground screw | - | - |

