USB 2.0 To Fiber Optic Extender, Also called USB2.0 To Fiber Converter. The device includes a transmitter and a receiver, which can extend the USB 2.0 device to a remote location over 1 fiber cable, max distance 250m (SM or MM fiber cable).
The high reliability of this device make it can be widely used in military command and control system, police command and control system, traffic management system, the energy and electricity supply industry, government office, medical system, commercial presentation, multimedia and public utilities, etc.
Product feature:
1, Max extension distance 500m (SM or MM fiber cable).Longer extension distance available.
2, Single/Duplex fiber transmission, pure hardware design, no driver needed, compatible with all operation systems, support plug and play
3, Auto recognition of High-speed(25Mbps~480Mbps),Full-speed(500Kbps~12Mbps),Low-speed(10Kbps~1.5Mbps)USB device.
4, Support USB1.1 and USB 2.0 devices, cameras, printers, U disk, scanners, audio devices, touch screens, game controllers, mouse and keyboard, etc.
Product specification:
Optical | Connector | SM/MM SC/FC/ST |
Wave length | 1310nm/1550nm | |
Physical | Size (L× W ×H) | 104mm x104mm x28mm |
Case | Aluminum | |
Color | Black | |
N.W. | 0.75Kg | |
Power | Voltage | 5V DC |
sender power consumption | <5W | |
receiver power consumption | <5W ,Powered by USB cable, no external power adapter required | |
Environment | Working temperature | -20℃-70℃ |
Storage temperature | -40-85℃ | |
Humidity | 0-95% (non-condensing) |
USB interface(Type A):
RX | 1, connect to PC |
TX | 1 , connect to USB devices, max 500mA |
Panel diagram:
Note:When the fiber and data are connected, the F & D indicator flash, otherwise off. Then the USB indicator is on when the transmitter is plugged into the USB device, otherwise off. If the indicator is not normal, need to re-plug the USB device.
Connection diagram: