220V Ultra Quiet Commercial Juice Maker With 2800r/min Rotate Speed For Fruit Shop

Konmax Juice Extractor Description:

1. High power and sleek design with juicer and blender

2. 76mm extra large feeder tube

3. Stainless steel housing

4. Automatically separates juice from pulp

5. Stainless steel blade, bowl and basket

6. Easy to assemble, use and clean

7. Variable length rubber feet reduces walking

8. Safety interlocking switch stops juicer operating without cover locked into place

9. Safety stainless steel locking arm

Konmax Juice Extractor Application:

drink shops, fruit shop, restaurants, hotels, bars, card rooms, tea show, cafe, etc.

Konmax Juice Extractor Specification:

Konmax Juice Extractor Characteristic:

Super wide feed opening can hold a whole apple with quick speed and high efficiency

Powerful horsepower motor could produce 84% percent syrup at a time

Special safely and convenient handle switch

Streamline project plastic body with five star qualities

Konmax Juice Extractor Before Operation:

A. Power supply of 110v-240v The power supply must have the safety system to connect with the ground.

Please don’t replace the machine’s cable by yourself.
B. Check the lid whether lock closely with the bower centering (You can pull the spigot of juice for cask

made of stainless steel if it not move, it’s correct .If it is lax you can readjust the lock pin
C.Connect to the power supply and turn on the machine, examine the machine with your eyes and ears to

make sure the function normal before normal work.

Konmax Juice Extractor Operation Procedure:

1)Please clean the fruit or vegetable you want to squeeze before squeeze and peel off the husk.(For example:orange, watermelon).Some fruit like peach and apricot they have the firm pip you must take out them or it will shatter machine .

2)Cutting the pulp into piece or block smaller than the size of the ostium for putting the pulp. Then put them into clean container. When turn on the machine you can put the pulp into ostium continuously or use the fruit pusher, then the fresh juice will pour from the ostium

3)If you want to change fruit or vegetable the machine worked in normally, infusing clean water into ostium it will be cleaned and the peculiar smell will be resisted.

After Operation:

If you want to clean or change the blade and centrifugation basket after you use the machine over. You must turn off the power then you can open the lid and screw the nut, take out the blade, centrifugation basket to clean completely (Don’t move the other parts lest should effect the quality for boot- strap). Finally install the parts with reversed sequence. Putting on the lid then the machine can work

normally again.

Konmax Juice Extractor Detailed Photo:

Konmax Juice Extractor Application Photo: