9L×3 1000W Commercial Cool Drink Dispenser / Beverage Dispenser For Shops
Konmax Cold Drink Dispenser Description:
Konmax Cold Drink Dispenser Application:
Juice bar ,restaurant,store , supermarket
Konmax Cold Drink Dispenser Specification:
Model | LSJ-9L×3 |
Voltage | 220-240V/110-115V |
Frequency | 50/60/HZ |
Cold power | 385W |
Heat poqer | 1000W |
Cold-beverage temperture | 7-12℃ |
Hot-beverage temprture | 52-58℃ |
Shape size | 460×430×690 |
Carton Packing | 480×450×700 |
Weight | 30 |
Gross weight | 32 |
How to use the cold beverage machine ?
1.To fall prepared beverage into the crock , the height of it is should not exceed the standard height (9L-12L-18L-20L-50L), otherwise the beverage will flow into the churn-dasher from the dasher tube,which will make the dasher burn .
2.The temperature of the beverage should not too high (not exceed 35), otherwise it will make bad effection for the refrigeration .
3.Plug in the supply power to the 3 hole socket , the grounding hold should connect with the protecable wire or fixture to ensure the safety .
4.To turn the switch on the position of refrigeration , press down the refrigeration switch , the compressor fan starts running and refrigeration system starts working .
Then start the dasher to mix or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please make the cup against the push board lightly .the beverage will flow into the outlet mouth .
6.when the temperture reduces to the certain degree , the refrigeration will stop running because of the influence from the temperature cotroller .And when it increases, it will start automatically again .
7.It should re-start after 5 minuters if it turn off suddenly or stop temporarily .otherwise it will damage the compressor .
Konmax Cold Drink Dispenser Detailed Photo:
Konmax Cold Drink Dispenser Packing Photo:
For more information abut the instrcution manual please check :
How to use the cold beverage machine.pdf