Konmax Slow Juicer Description:

The fruit and vegetable juicer is a device that can quickly squeeze fruit and vegetable juices. The fruit and vegetable juicer is simple to operate and easy to clean.

1. Before using the fruit and vegetable juicer, the cutter and the centrifugal filter are tightened first, centrifuged and filtered, and then the box is placed on a fixed foundation and the cutter is opened again.

2. Wait for the motor to start and return to food normally.

3. The reduction of food should not be too big, too thick or difficult, so as not to damage the cutter and motor overload.

4. The centrifuge cage should not store too much food. If there is too much powder, it should be cleaned up in time, otherwise it will cause vibration.

5. The juicer always keeps the inside and outside of the machine clean. After each use, clean carefully. But when cleaning, the bottom of the juicer should be rinsed under the tap, and not soaked in water, so as not to affect part of the basic electrical insulation performance.

Konmax Slow Juicer Application:

Household , resurants , school , coffee bar ,juice bar etc

Konmax Slow Juicer Specification:

Konmax Slow Juicer Usage Notice:
This slow juicer is strictly forbidden to squeeze cane, cherry, coconut, hawthorn, bayberry, and other fruits with more roots or harder cores.
When squeezing celery juice, you need to cut it into short pieces, and then put in.Always pay attention to the dynamics of the juicer to avoid jamming.
If the machine gets stuck, please turn off the power immediately and clean it up immediately.

Konmax Slow Juicer How to use ?

1. Align the middle frame with the host vertically, put it down, and assemble it in place.
2. Align the bottom of the juice extraction net with the motor wheel and press it down. Use both hands to make sure that the press is in place. Rotate a few times to see if there is any scratching in the rack. (When lifted, it is taken apart)
3. Install the top cover and fasten the safety buckle. (When buckling the safety buckle, please buckle the upper part of the buckle first, and then press it down to buckle in place. The opposite is true when disassembling, please open the bottom of the buckle first to open the safety buckle)
4. Try the machine to see if it works normally. If the noise or vibration is too large, you can install it again. Pressing the juicer net in another position will have a good effect
5. Peel and core the vegetables and fruits first, wash and set aside. If the size is larger than the filling opening, please cut it into small pieces.
6. Put the juice cup at the juice outlet and the big slag collecting bucket at the slag outlet.
7. Turn on the machine, put the fruits and vegetables into the juicer, press down with the push rod, you can squeeze fresh and delicious juice.
8. After squeezing out the juice, some juicers have an external juicer for the convenience of customers, and they need to pour the juice into their own cups.
9. Pour out the pomace and prepare for cleaning.

Konmax Slow Juicer Clean up skills

1. It is the most common thing to twist the fruit with a juicer, and it is not easy to clean after the fruit is squeezed.

2. At this time, we can slowly pull out the clogged fiber strips on the cutter head of the juicer according to the direction of the juicer. Don't use too much force!

3. Then clean, other parts can be scrubbed with a steel wire juicer ball, but not too hard.

Konmax Slow Juicer Detailed Photo:

Multi-purpose for fruit and vegetables

Large-caliber juicer
Without cutting the whole squeezing, the taste is better without oxidation.

High yield juice about 96%